Step 1 Umbrella Assembly - Treasure Garden AG25T Assembly And Operation Manual

NOTE: REFER TO SEPARATE BASE OR MOUNT KIT MANUAL
FOR BASE ASSEMBLY PRIOR TO PROCEEDING.
1
STEP
UMBRELLA ASSEMBLY
Two-persons recommended for team lift and to complete assembly.
With base cover in place or mount kit installed, lift umbrella up and insert the main frame
onto the installed rotating hub (Fig. 1). Secure umbrella into place by inserting the (2) bolts
and (2) washers and tighten using 6mm hexagon wrench provided (Fig. 2).
REMOVE ALL PLASTIC PACKAGING MATERIAL FROM ALL PARTS PRIOR TO
OPENING UMBRELLA. CHECK UNDER CANOPY FOR PACKAGING AROUND RIBS.
Your umbrella is now ready for use!
(Fig. 1) (Fig. 2)
2