Blade PulsePak User Manual

User Guide
GETTING STARTED
WARNING: Before using this product, read this manual for important safety
and health information.
TOP
Power Output Plug
(micro USB for Android or
Lightning for iPhone)
Required Items:
- A compatible device such as a cellular phone, camera, or electronic accessory
- A micro-USB cable for recharging PulsePak
Attaching PulsePak to Your Phone:
Insert PulsePak's Power Output Plug into your phone's charging port. PulsePak
will automatically begin charging your phone. Gently press the Retractable
Switch and slide the switch backward to retract the Power Output Plug for safe
storage. Recharge PulsePak's internal battery by connecting a micro USB cable
to the Micro USB Power Input.
Note: For optimal results, exit all apps running in the background and turn off
power draining features such as GPS, Bluetooth, Wifi, etc.
LED Indicators:
Red Light - PulsePak's internal battery is recharging.
Green Light - PulsePak's internal battery has been fully charged.
BOTTOM
Retractable Switch for
Power Output Plug
Micro USB Power Input
CLEANING
Before cleaning, disconnect all cables and remove PulsePak from any external
devices.
• Use a soft, lint-free cloth.
• Avoid getting moisture in openings.
• Don't use cleaning products
IMPORTANT HEALTH AND SAFETY WARNINGS
WARNING: Failure to follow these safety instructions could result in fire,
electric shock, or other injuries, or damage to your phone or other property.
Read all safety information below before using PulsePak.
CHOKING HAZARD: Contains small parts. Not for Children under 3 years.
Key Ring Hole
May contain sharp edges.
Operational Temperature Warning:
PulsePak is designed to operate and be stored in ambient temperatures
LED Indicator
between 32° and 95° F (0° and 35° C). Do not expose PulsePak to extreme
temperatures, including heat caused by intense sunlight; it can be damaged
and battery life shortened if stored or operated outside of these temperatures.
Avoid exposing PulsePak to dramatic changes in temperature or humidity. If the
temperature of PulsePak exceeds normal operating temperatures, it may not
function properly and may result in permanent damage. If PulsePak or your
mobile device is excessively hot, is emitting odor, is deformed, abraded, cut, or
is experiencing or demonstrating an abnormal phenomenon stop using the
affected device(s) immediately and contact the manufacturer. This product
contains chemicals that are known to the state of California to cause cancer
and birth defects or other reproductive harm.
PROPER CARE FOR YOUR PRODUCT
Be sure that PulsePak is securely connected to your device during use. If
PulsePak is not securely connected, it could result in damage to your phone.
Blade Electronics assumes no responsibility for any damage caused to devices
used with PulsePak.
PulsePak has an internal, lithium-ion rechargeable battery. Rechargeable