Advertisement
Quick Links
PRD00200
Style Number:
To avoid injury during assembly, disassembly, use, adjustment and/or movement of the
PRIMED Lacrosse Rebounder, the following warnings MUST be observed at all times:
•
•
•
•
•
•
•
•
Lacrosse Rebounder
Two competent adults are required to assemble, disassemble, adjust, and/or locate the Lacrosse
Rebounder.
Extreme caution and appropriate judgment should ALWAYS be exercised when assembling,
disassembling, using, adjusting, or locating the Lacrosse Rebounder.
NEVER climb on or hang from the Lacrosse Rebounder.
ALWAYS anchor the Lacrosse Rebounder as instructed prior to use. An unsecured rebounder can
cause serious injury.
Bungee cord net loops will be under tension and must be attached and/or detached carefully.
The Lacrosse Rebounder should be placed on a flat surface that is suitable for play while ensuring
maximum user safety.
Fully disassemble the Lacrosse Rebounder for seasonal storage.
Do not leave the Lacrosse Rebounder outdoors in inclement weather as moisture and other
elements may adversely affect the performance of the unit.
1/7
Advertisement
Related Manuals for Dick's Sporting Goods PRIMED PRD00200
Summary of Contents for Dick's Sporting Goods PRIMED PRD00200
- Page 1 PRD00200 Lacrosse Rebounder Style Number: To avoid injury during assembly, disassembly, use, adjustment and/or movement of the PRIMED Lacrosse Rebounder, the following warnings MUST be observed at all times: • Two competent adults are required to assemble, disassemble, adjust, and/or locate the Lacrosse Rebounder.
- Page 2 PRD00200 Lacrosse Rebounder Style Number: • Ensure all components are properly assembled prior to use. • Examine your Lacrosse Rebounder regularly for wear and tear. Discontinue use immediately if any defect is found. • Keep away from fire and heat sources. •...
-
Page 3: Package Contents
PRD00200 Lacrosse Rebounder Style Number: 1.PACKAGE CONTENTS: SIZE: 8'×4’ PART PHOTO DESCRIPTION SPEC. Q'TY 1.5”X34.8” 2PCS Steel tube 1.5”X32” 1PCS Steel tube 1.5”X(32”+10.7”) 1PCS Steel tube 1.5”X(32”+10.7”) 1PCS Steel tube 1.5”X34.8” 2PCS Steel tube 1.5”X32” 1PCS Steel tube 1.5”X32.6” 1PCS Steel tube 0.98”X39.4”... - Page 4 PRD00200 Lacrosse Rebounder Style Number: FIGURE 1 FIGURE 2 Connect tubes as shown in Figure 1. Connect support tubes part 8 and 9 as shown in Figure 2, tighten up the support tubes using nuts and bolts, part number 13 and 14. Install height and angle adjustment tubes 11 and12.
- Page 5 PRD00200 Lacrosse Rebounder Style Number: Connect the net to the frame tube. 1. Attach bungee cords to rebounding net by looping bungee cords though net and looping back through bungee. 2. Pull bungee cord to frame tube (Fig A). 3. Wrap the hook around the tube (Fig B). 4.
- Page 6 PRD00200 Lacrosse Rebounder Style Number: 5. Find the buckle and hook and loop Strap on the tarp at the rear side (Fig D). 6. Insert the strap into the buckle (Fig E). 7. Secure the strap with hook and loop closure (Fig F).
-
Page 7: Limited Warranty
PRD00200 Lacrosse Rebounder Style Number: Limited Warranty Limited Warranty Limited Warranty Dick’s Sporting Goods, Inc. (the “Company”) warrants this product to be free from defects in workmanship and materials under normal use and conditions for a period of ONE YEAR FROM THE DATE OF ORIGINAL PURCHASE. This Limited Warranty is not transferable and is available only for the original purchaser of the Product.
Need help?
Do you have a question about the PRIMED PRD00200 and is the answer not in the manual?
Questions and answers