Download Print this page
Sealey RJA1550.V2 Manual

Sealey RJA1550.V2 Manual

Trolley jack 1.5tonne low entry aluminium rocket lift

Advertisement

Quick Links

thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions,
and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Refer to
Wear safety
instruction
footwear
manual
1. SAFEtY
Ensure the jack is in sound condition and good working order. Take action for immediate repair or replacement of damaged parts. Use
9
genuine parts only. The use of non-genuine parts may be dangerous and will invalidate the warranty.
Locate the jack in a suitable, well lit working area.
9
Keep working area clean and tidy and free from unrelated materials. Use jack on level and solid ground,
9
preferably concrete. Avoid tarmacadam as jack may sink in.
Chock wheels of vehicle.
9
Ensure the vehicle handbrake is engaged, engine is switched off and transmission is in gear (or "PARK" if
9
automatic).
9
Ensure minimum distance of 0.5m between vehicle and static objects such as doors, walls, etc. to allow for
vehicle tilting.
9
Ensure all non-essential persons keep a safe distance whilst the jack is in use.
Ensure there are no passengers in the vehicle.
9
Place jack under only those lifting points recommended by vehicle manufacturer (see vehicle handbook).
9
Check that the lifting point is stable and centred on the jack saddle.
9
Ensure the jack wheels are free to move and that there are no obstructions.
9
DANGER: Use the jack for lifting only, NOt for supporting the lifted load.
Ensure there are no persons or obstructions beneath the vehicle before lowering.
9
Use suitable axle stands under the vehicle before proceeding with any task.
9
Use a qualified person to lubricate and maintain the jack.
9
Ensure that only hydraulic jack oil is used in the jack.
9
DO NOt operate the jack if damaged.
8
DO NOt allow untrained persons to operate the jack.
8
DO NOt operate the jack when tired or under the influence of drugs, alcohol or intoxicating medication.
8
DO NOt exceed the rated capacity of the jack.
8
DO NOt allow the vehicle to move during lifting or lowering, or use the jack to move the vehicle.
8
DO NOt jack vehicle if there is a risk of spillage of fuel, battery acid, or other dangerous substances.
8
DO NOt work under the vehicle until appropriately rated axle stands have been correctly positioned.
8
DO NOt use the jack for purposes other than that for which it is intended.
8
DO NOt top up hydraulic system with brake fluid. Use hydraulic jack oil only. (Sealey Part No: HJO500mLS or
8
HJO5LS)
DO NOt adjust the safety overload valve.
8
When not in use store jack, fully lowered, in a safe, dry, childproof area.
9
2. INtRODUCtION
made primarily for the motor racing enthusiast, this jack weighs in at just 12.75kg. Utilises many weight-saving techniques such as a skeletal lift
arm. Features Rocket Lift by use of twin pistons, bringing saddle up to jacking point with minimal pumps. Polyurethane wheels for smooth and
quiet manoeuvring, which also limits damage to garage floors. Lifting bars are fitted either side of the anodised aluminium chassis enabling fast,
lightweight pick-up.
3. SpECIFICAtION
model no ............................................................ RJA1550.V2
Capacity ................................................................... 1.5tonne
Length ........................................................................ 485mm
max. chassis height .................................................... 125mm
max. saddle height ..................................................... 370mm
min. saddle height ........................................................ 88mm
Nett. weight ................................................................. 13.5kg
© Jack Sealey Limited
tROLLEY JACK 1.5tONNE LOW ENtRY
ALUMINIUM ROCKEt LIFt
RJA1550.V2
mODEL NO:
Original Language Version
Apply
Chock
Wheels
X2
RJA1550.V2 | Issue:3 (1,F) 22/01/19
Never
exceed

Advertisement

loading

Summary of Contents for Sealey RJA1550.V2

  • Page 1 RJA1550.V2 mODEL NO: thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance. IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED.
  • Page 2 With the jack level, remove the oil filler plug, located on the ram body underneath the top plate. Remove 4 screws to access. The oil should be level with the bottom of the oil filler hole. If it is not top up with clean hydraulic jack oil. (Sealey Part No: HJO500mLS or HJO5LS) 6.3.3.
  • Page 3 Important: No Liability is accepted for incorrect use of this product. Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim. Sealey Group, Kempson Way, Suffolk business park, bury St Edmunds, Suffolk. Ip32 7AR 01284 757500 01284 703534 sales@sealey.co.uk...