Installing Grease Cartridge; Removing Empty Grease Cartridge; Filling Gun From A Bulk Container - RB -1958 Manual

Installing Grease Cartridge

1. Pull back on the plunger handle until the plunger rod is fully extended. It may be necessary
to loosen container to break vacuum.
2. Remove the plastic cap from the grease cartridge and insert the cartridge into the container
tube.
3. Remove the pull tab from grease cartridge and screw grease tube assembly into pump
assembly.
4. Release the plunger rod from the slot.
Depress lock lever to operate plunger handle.

Removing Empty Grease Cartridge

1. Pull back on the plunger handle until the plunger rod is fully extended.
2. Unscrew the grease tube assembly from the pump assembly.
3. Carefully release the plunger handle to eject the empty cartridge from the container tube.
Rotate grease container counter clockwise
to remove. Turn clockwise to tighten.

Filling Gun from a Bulk Container

1. Remove the pump assembly from the grease tube assembly
2. Insert the open end of the grease tube assembly into the bulk container. Slowly pull the
plunger handle back while pushing the grease tube assembly deeper into the lubricant to
preventing air pockets.
3. Assemble the pump assembly to the grease tube assembly. Disengage the plunger rod
from the plunger by depressing lock lever. Push the plunger rod into the grease tube
assembly.
Installing Grease Cartridge
Plunger rod fully extended.
7