Vivo DESK-V102E Instruction Manual
  1. Manuals
  2. Brands
  3. Vivo Manuals
  4. Indoor Furnishing
  5. DESK-V102E
  6. Instruction manual

Vivo DESK-V102E Instruction Manual

Black electric single motor desk frame
Hide thumbs Also See for DESK-V102E:
1
2
3
4
5
6
7
8

Advertisement

Table of Contents

Black Electric Single Motor Desk Frame
Instruction Manual
SKU: DESK-V102E
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
https://vivo-us.com/products/desk-v102e
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST
help@vivo-us.com
www.vivo-us.com
Chat live with an agent!
309-278-5303

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DESK-V102E and is the answer not in the manual?

Questions and answers

Related Manuals for Vivo DESK-V102E

Summary of Contents for Vivo DESK-V102E

  • Page 1 Black Electric Single Motor Desk Frame Instruction Manual SKU: DESK-V102E Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product. https://vivo-us.com/products/desk-v102e GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST help@vivo-us.com...

  • Page 2: Electrical Safety Instructions

    WARNING! If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual and do not exceed weight capacity.

  • Page 3: Tools Needed

    TOOLS NEEDED Phillips Screwdriver DO NOT EXCEED WEIGHT CAPACITY. 176lbs Failure to do so may result in serious injury. (79.83kg) Level ASSEMBLY STEPS STEP 1 Loosen the two screws using the allen key (S-D). Adjust the frame length to suit the desktop. Retighten all screws.
  • Page 4 STEP 3 With the frame upside down, place the feet (F) on the legs as shown. Insert the bolts (S-A) in the desk legs using an Allen Key (S-D). STEP 4 With the frame positioned upright, turn the knob counterclockwise to loosen the sync rod (B). Adjust the sync rod to match the frame’s width.
  • Page 5 STEP 5 (continued) Hang the shelf onto the center part of the telescopic crossbar. Tighten the screws. STEP 6 Connect the adapter (J) and wires attached to the leg to the control unit (C) Plug the adapter (J) into an outlet on the wall after connecting it to the control unit.
  • Page 6 STEP 7 Remove the protective film from the adhesive rubber pads (S-F). Position the rubber pads on the side brackets as shown. Place the desktop on the frame and insert the desktop mounting 7/8" screws (S-B). Tighten all screws. STEP 8 Attach the controller to the underside of the desktop using 3/4"screws (S-C) as shown.
  • Page 7 CAUTION! Do not exceed desk weight limit. Keep area of vertical motion free of obstacles. Keep weight on desk balanced for Leave enough slack in cables to correct operation and longer life of allow for full range of vertical components. motion.
  • Page 8 - 92% within < 3hr www.vivo-us.com AVG. RESOLUTION TIME : < 15 M (within office hrs) Chat live with an agent! AVG. RESOLUTION TIME : 5M 4S 309-278-5303 (within office hrs) FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com...

Table of Contents