Related Manuals for Gude V 621 C
Summary of Contents for Gude V 621 C
- Page 1 #85075 V 621 C English – GB Translation of original operating instructions Battery Charger V621 C © Güde GmbH & Co. KG - Birkichstrasse 6 - D-74549 Wolpertshausen - Deutschland...
- Page 3 (FI) fitted! In case of any change to devices not discussed with us the Declaration expires. Caution! Marking of devices: V 621 C • Keep your workplace clean and tidy. Messy product No: 85075 workplace and disorder on the table increase the risk of accident and injury.
- Page 4 • When working outdoors, use special extension • Apply in use, always gloves and eye protection and cables. To work outdoors, special extension cables are be alert when working with acid! needed, mark in the appropriate way. • Always remain concentrated. Mind what you are Do not leave the switched-on unit unattended, it doing.
- Page 5 Direct electrical contact Warning against caustic substances Defective cable one plug may cause an electrical shock injury. Commands: Have the defective cables and plugs replaced at a specialist’s. Use the unit on a connection equipped with a current protection (FI). Indirect electrical contact Read operating manual before use Use protection gloves...
-
Page 6: Operation
Screw on the handle according to (Fig. 4). Note: The terminals may not touch. Put the axle through the charger (Fig. 1/2). Fit the supplied safety rings on. Mount the wheels (Fig. 1/1) on the axle and secure them with safety rings (Fig . 5). Notice: The charger is equipped with overload protection. - Page 7 Ensure that the mains voltage is equal to the desired value Ammeter does not indicate. Clean the terminals and put the clamp on again. Have it checked at a specialist´s . Replace the battery. Check on the charger working ability on a perfect charged battery.
Need help?
Do you have a question about the V 621 C and is the answer not in the manual?
Questions and answers