Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for KOCOM KHV-446S
Summary of Contents for KOCOM KHV-446S
- Page 1 User’ s Manual [Color Hands-free Home Automation System] KHV-446S / KHV-446T/ KHV-446ST/ KHV-456S KHV-456T KHV-456ST This manual is based on the date as shown in the right and specifications are subject to change without notice for quality improvement. 04.10.A...
-
Page 2: Table Of Contents
1) This product is produced under strict quality control and inspection procedures. 5. Overall Wiring Diagram ....12 2) If this product breaks down during proper use as a result of product defect, KOCOM 6. Main Body Installation ....14 will repair it within one year from date of purchase free of charge. - Page 3 For equipment whose cables are connected to terminals, please contact your local sales agent or qualified electrician. � When replacing old fuse with new one, do not directly touch it with bare hands. Use insulated tools or contact A/S center. _www.kocom.com Security Home Auto System_...
- Page 4 �Before installing or providing A/S service, be sure that the power is disconnected. Avoid direct exposure to sunlight and store equipment at the place free from dust and high temperature as you can. High temperature of equipment may cause fire and electric shock. _www.kocom.com Security Home Auto System_...
-
Page 5: Safety Instructions
- This equipment is electronically precision equipment, so do not arbitrarily disassemble it. - In installation of the product, do not fail to follow the specifications (specifications offered by KOCOM). - Do not touch the product with alien materials (for example, sticker, magnet, opener, metal chopstick, etc.) or insert them into the product (it may cause reduction of the product's durability and harmful results to user as well). -
Page 6: Product Features / Warnings
● The color of GND wire should be green or yellow and be fixed to chassis are excluded from KHV-446T and 456T. ※ KHV-446ST/456ST as standard. (GND-marked position) using washer with proper elasticity together. Functions vary according to specifications of each product. _www.kocom.com Security Home Auto System_... -
Page 7: Name Of Each Part
Lens ● ● Speaker Power Lamp ● ● Call Button � Front Door Camera (KC-C50) Wiring Diagram 1. Blue: +12V (Camera Power) 2. Yellow: GND 3. Red: VOICE (Camera Voice Signal) 4.White: VIDEO (Camera Video Signal) _www.kocom.com Security Home Auto System_... - Page 8 Overall Wiring Diagram � Terminal Wiring Diagram � Specifications for Pins of Main Body � Specifications for Pins of Terminal _www.kocom.com Home Automation System_...
-
Page 9: Camera Installation
Thus, be careful to install camera according to the proper range of height. heater may cause mechanical troubles of the product. Avoid installing the product where any one of above conditions exists. (unit: mm) (unit: mm) _www.kocom.com Security Home Auto System_... -
Page 10: Warnings In Installation
This function offers self-testing by operating system in order to minimize damages due to system breakdown in emergencies(sensor test is unavailable. Sensor test should be carried out after sensor operates. Before sensor operation test, please contact administration office or KOCOM A/S headquarter). Camera (Outdoor, Front door) Piping Box �... -
Page 11: Adjusting The Video Display And Call Sign Volume
. If you want to identify the visitor without talk, please see the video screen without pressing the “talk” button. seconds, 3rd LED among the LEDs at the left-bottom side of LCD is (After 30 seconds, video screen is automatically turned off). turned off and mode for adjusting the call sign volume is ended. _www.kocom.com Security Home Auto System_... - Page 12 3 seconds, integrated administration office is called. Call sign rings at the main body for house. Then, pressing the “talk”or “guard”button, communication with guard becomes �Call from other house, internal line LED flickers. available. _www.kocom.com Security Home Auto System_...
-
Page 13: Operation In Call During The Communication
�In case of simultaneous calls from guard and front door up/down key. �Pressing the "talk" button, communication with (LEDs of guard and front door flicker), the first pressed guard becomes available (Guard LED is turned on). button between the two is first linked. _www.kocom.com Security Home Auto System_... -
Page 14: Security And Accident Prevention
� Setting the Security Mode 1 and Operation in Unlawful Entry by Thief Security and Accident Prevention (KHV-446S/446ST/456S/456ST) � Operation in Fire alarming sound fire �Pressing the "s 1" button, security mode 1 works �When security sensor 1 detects an invasion, s 1 LED (S 1 LED is turned on). - Page 15 30 seconds, alarming sound is sent to �Pressing the "reset" button, alarming sound is turned off and not sent to guard. guard for emergency call (the equipment recognizes that security sensor is working). _www.kocom.com Security Home Auto System_...
-
Page 16: Interlocked Communication With 900Mhz Wireless Telephone
�Press the Wireless Setting button on the main body of Home Auto. Then, press the “function,” “redial,” and “1” buttons on alarm mode works. wireless handset in order. After 2 ~ 3 seconds, user can hear beep sound from the handset, which indicating that setting is completed. _www.kocom.com Security Home Auto System_... - Page 17 When a call is successfully connected, call signals are heard, melodic sound is heard at the called house, and call signals are heard at wireless telephone. Press the “talk”or “internal line”button on main body installed at house or the “outside” button on wireless telephone to connect call. � internal line button � talk button _www.kocom.com Security Home Auto System_...
-
Page 18: Read Before Requesting The Repairing Works
Read before requesting the repairing works… Do not fail to check the following items before requesting the repairing works. If no troubles are found out after check, contact KOCOM’ s local service center. Alarming Situation Check Points Actions � �... - Page 19 How to Operate KOCOM Home Auto User’ s Manual � Call from Lobby Phone to House (ex) A call to house No. 1001 (for Unmanned Security) “house call” talk Visitor’ s figure is displayed on the screen at the Visitor presses the house number to be called and called house.
- Page 20 How to Operate � Call from Lobby Phone while Communication with Guard � Call from Lobby Phone to House LOBBY PHONE house call lobby/ lobby/ Gate 1001 Gate A visitor presses the house number Lobby phone LED (house LED, If user presses the talk button at If a call is received from lobby phone to After finishing the communication with guard, press the to be called and “house call”...
- Page 21 � How to Open Common Gate using Card Approach the registered card to Common Gate opens. card reader attached to lobby phone. * Opening method may vary according to the type of card reader attached to lobby phone. � How to Open Common Gate using Password house Pass number...
Need help?
Do you have a question about the KHV-446S and is the answer not in the manual?
Questions and answers