Panasonic EH‑XR10 Operating Instructions Manual page 15

5
5
Once the preheating process completes,
press the appliance onto your skin and
begin moving it around. (See page 16.)
The power will be automatically turned off after each
mode is completed.
• Press the POWER/SELECT switch to change the
mode or turn off the power midway through.
How to apply the head properly
• Apply the appliance to the skin as
both ultrasonic probe (a) and frame
(b) are making complete contact.
• Press the appliance tightly to the
skin as both ultrasonic probe and
frame are contacting the skin in
parallel.
The head vibrates except in RF
mode.
• RF and Ultrasonic are only effective when the
head is vibrating.
Note
• Head vibration produces sound, which is just normal
operation.
EH-XR10_HK.indb 15
Situations of an alert sound triggering followed by
vibration stopping
Remove and press the ultrasonic probe on your skin
again if either of the following notifications occur.
►Over-care prevention sensor
The ultrasonic probe has been in contact with your face
for approximately 15 seconds.
►Fitted contact sensor
The ultrasonic probe has not made contact with the skin
for approximately 15 seconds.
An alert will trigger and the power will turn off after
approximately 1 minute if the appliance continues in


either of these states.
15
2020/01/24 18:17:47