pottery barn kids BELDEN BUNK BED Assembly Manual

PRE-ASSEMBLY:

Remove all parts and hardware from the box and place them on a clean carpeted, or scratch-free work surface (The
shipping box provides an ideal work surface). This will avoid damaging any parts during assembly.
To avoid accidentally discarding small parts or hardware, do not dispose of any contents until assembly is complete.
Two people are recommended for ease of assembly.
Prior to starting assembly, use the parts and hardware lists to identify and separate each of the pieces included.
The illustrations provided allow for easier assembly when used in conjunction with the assembly instructions.
Note: Do not fully tighten all th bolts until all parts are in place. Failure to follow these instructions may cause the bolts
to misalign during assembly.
Please use caution if using power tools to aid in assembly . Power tools can damage hardware or split wood.

PARTS INCLUDED:

A – Footboard (1)
B – Headboard (1)
C – Guardrail (2)
D – Right side panel (1)
E – Bottom frame with drawers (1)
F – Left side panel (1)
G – Slat rolls (2)
H – Ladder (1)

TOOLS REQUIRED:

Phillips head screwdriver (not included)
T – Allen Key (included)

HARDWARE INCLUDED:

I – Long Hex Bolt 5/16"x100mm (20)
K – Short Hex Bolt 1/4" x 32mm (7)
Date: Oct.24, 2012
Rev.
pottery barn kids
BELDEN BUNK BED
J – Short Hex Bolt 1/4"x63mm (8)
L – Spring Washer 5/16"x13x1.5 mm (20)
Page 1 of 6