Disassemble Cleaner - Hayward AquaVac 6 Series Troubleshooting Manual

How To: Disassemble Cleaner
Turn Power off and Lift handle
Step 1 Step 1
Grab the handle on the canister and lift upright to a 90
degree position.
Place cleaner on its side
Step 3
Place the cleaner on its side so you can access the side
wheels of the cleaner.
11
Remove canister from cleaner
Step 2 Step 2
Lift the canister out of the cleaner by holding the
handle and lifting straight up.
Remove hub caps from cleaner
Step 4
Use a small flat head screwdriver to remove the hub
caps from each wheel. Repeat steps on opposite side.