Status - Datavideo NVS-33 Instruction Manual

Status

You will see the Status page immediately after logging into the NVS-33 web UI. On
the Status page, you will be able to view the Operation Mode, Video Resolution,
Stream Settings, Record Settings, Record Media and Messages.
Note: The NVS-33 web UI does not update automatically so to learn the latest
device status, please refresh the page manually.
While monitoring streaming and recording, please update the page periodically
regardless of how you operate the device (using the device's physical buttons only or
using the device's physical buttons along with the web UI). This ensures the page is
always displaying the most up-to-date information.
"Messages" should display the error code if an error occurs. The device's error codes
are listed in the table below.
Error Messages
STR_UP_ETH_LINK_DOWN
STR_UP_ETH_LINK_RESTORE
STR_UP_ETH_CONN_ERR
STR_UP_ENC_START_ERR
STR_UP_ENC_BUFF_ERR
STR_RUN_ETH_LINK_DOWN
STR_RUN_ETH_CONN_ERR
STR_RUN_ENC_BUFF_ERR
STR_RUN_PROG_BUFF_ERR
STR_RUN_PROG_SOCKET_ERR
STR_STOP_PROG_EXIT_ERR
REC_UP_DISK_ERR
REC_UP_DISK_EMPTY
Descriptions
Ethernet Link Down
Ethernet Link Up from Down
RTMP Cannot Publish (Retrying)
Encoder Start Failed
Encoder Buffer Error
Ethernet Link Down (Dropped)
RTMP Drop Connection (Retrying)
Encoder Buffer Error
Streamer Buffer Error
Streamer Socket Error
Streamer Stop Failed
Disk Bad Sectors/Read Only/File
System Error
No Disk
20
Error Code
133
134
140
129
130
133
140
130
137
140
141
148
144