Software Upgrade - IMI TA-SCOPE Quick Manual

Download HySelect
Download and install HySelect from
www.imi-hydronic.com.
Transfer of data
Connect TA-SCOPE to your PC to transfer
data, e.g., hydronic networks and collected
system information to and from the HySelect
software.

Software upgrade

When a new version of the TA-SCOPE
software is available, HySelect will
automatically suggest an upgrade. Simply
connect your TA-SCOPE and follow the
instructions on the PC.
Care and storage recommendations
- TA-SCOPE can be cleansed with a damped
cloth and a lenient cleaning-agent.
- Change filter in the hoses regulary.
- Never leave water in the Dp Sensor when
risk of freezing exists (i.e., in a car during
winter)!
Warning! Do not open the instrument. This can damage the instrument and void
your guarantee! See user manual for further information.
The instrument (Dp sensors, temperature
sensors) has been calibrated before delivery.
IMI Hydronic Englineering recommend
a yearly calibration and service. (See
Guarantee/Calibration/Service form).
PC communication
Calibration/Service
Use the USB-cable to connect the Handheld
to a PC and the HySelect software will
automatically connect to TA-SCOPE. Simply
follow the instructions on the PC.
- Do not expose to extreme temperatures, the
battery may explode if disposed of in fire.
- Storage above 140° F is not allowed.
- Other usage than specified in this manual
may cause damage to the unit or user.
Contact your local sales office for more
information.
9