Dismantling Procedure - Yashica FX-DQUARTZ Repair Manual

DISMANTLING PROCEDURE
Outside Covers
1. Bottom cover removal:
(1) Remove three bottom cover setscrews (61812529).
MD. I ight-proof plate ( 139680) and sprocket button ( 139651 ).
2. Top cover removal:
( 1) Remove the rewinding knob ass'y and three ASA dial ass'y setscrews which hold the ASA dial
ass'y.
(2) Remove the winding lever dress plate (152634) and the winding lever setscrew (counterclock-
wise), or otherwise the winding lever dress plate and winding lever setscrew can be removed
together by turning it with a piece of rubber (turn it counterclockwise). Remove winding lever
spring and top cover nut (322312).
(3) Remove the release button ass'y by turning it with a piece of rubber (turn it clockwise) and
three shutter dial setscrews (61913024) which hold the shutter dial ass'y.
(4) Remove the release socket decorating ring.
(5) Remove five top cover setscrews (61912529 x 2, 61903029 x 2, and 61912029). It is possible
to remove the top cover in the upward direction.
Winding Lever
Dress Plate
Winding Lever
Setscrew
Winding Lever
Ass'y
Winding Lever
Spring
Top Cover Nut
Release Socket
Decorating Ring
3. Removing leathers:
Rel ease Button
Ass'y
Fig. 1
( 1) Peel off the leathers of right and left sides.
Rewind Knob Ass'y
ASA Dail Ass'y
Notes: This leather is the selfstick type, it is reusable. (However, since the edge easily peels off when
replaced, use additional leather adhesive if necessary.)
4, Mount cover sub ass'y removal:
( 1) Remove four mount cover setscrews (63912224), the mount cover sub ass'y can be removed.
1