Argos OPTI 7607035 Assembly & User Instructions page 2

Assemble Instructions
Insert the elbow connectors (E) into one frame tube,
3
ensuring the strap holes face the same way and will be
parallel to the oor after construction. fl
D
B - Velcro Strap x 2
E
To connect the velcro strap (B), loop through the holes on
5
the elbow connector and attach to the connecting velcro
section on the strap. Place the connected end on a clean,
firm surface. Carefully bend the goal and repeat on other
end of the goal.
B
Position the assembled goals in place and x to the ground
6
using the 3 ground pegs (F ) per goal.
F
E
D
fi
Argos Ltd
489 - 499 Avebury Boulevard
Central Milton Keynes
MK9 2NW
Place one end of the goal on a clean rm surface. Holding the
4
top of the frame tubes, push downwards slowly. The frame tubes
will bow, allowing you to push together the elbow connector at
the top of the goals.
Turn the goal over and repeat.
Note: To secure frame rmly to ground always anchor one peg at fi
each anchor point as indicated.
Caution:
Check regularly that pegs are secure.
Loose pegs may cause injury.
Care should be taken when using a mallet as misuse may cause injury.
When assembled the goal is under tension. Extreme care must be
taken when disassembling.
fi
E
I - Pump x 1
D
Made in China
2 2