Advertisement
fig.4
4.3.
USING THE LED LIGHT
4.3.1.
Press the LED light button once (fig.4) to turn on the light. Press the button twice for a slow flash, and three times for a SOS
flashing light pattern.
4.4.
SETTING THE PRESSURE
NOTE:
•
When the pre-set value is lower than the value of peripheral pressure, the air pump cannot be activated.
•
CTI120 has an integrated mechanism for temperature protection. Self-protection will be activated to stop external inflation when the
temperature exceeds -15°C to 55°C. It should not be used continuously for more than 30 minutes. After 30 minutes, turn it off and let it
cool for 15 minutes before resuming operation.
•
A recommended inflation range is labelled on the side of tyre.
4.4.1.
Turn on the pressure gauge by pressing the 'U' button (fig.5).
4.5.
SELECT PRESSURE UNIT
After turning on the pressure gauge, press the 'U' button (fig.5) again to select the air pressure units on the display.
NOTE:
Conversion relationship of related units is as follow
1PSI = 6.89KPA
4.5.1.
To set the output pressure value press the + or - buttons (fig.6).
4.6.
INFLATION
Connect the inflatable object as shown below.
4.6.1.
Press the start/stop button (fig.7) to start inflating. When the air pressure in the inflated object reaches the preset air pressure value,
the air pump stops inflating automatically.
4.6.2.
Press the start/stop button can pause during the inflation, then press again to resume.
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
WEEE REGULATIONS
Dispose of this product at the end of its working life in compliance with the EU Directive on Waste Electrical and Electronic Equipment
(WEEE). When the product is no longer required, it must be disposed of in an environmentally protective way. Contact your local solid
waste authority for recycling information.
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500
© Jack Sealey Limited
fig.5
1BAR = 100KPA 1Kg/cm² = 98KPA
01284 703534
Original Language Version
fig.6
fig.8
sales@sealey.co.uk
fig.7
www.sealey.co.uk
CTI120 Issue 2(3) 07/03/19
Advertisement
