Related Manuals for SHOWTEC Sunstrip LED V1
Summary of Contents for SHOWTEC Sunstrip LED V1
- Page 1 MANUAL ENGLISH Sunstrip LED Ordercode: 30752 Highlite International B.V. – Vestastraat 2 – 6468 EX – Kerkrade – the Netherlands...
-
Page 2: Table Of Contents
Sunstrip LED Table of contents Warning ....................................2 Safety Instructions ................................. 2 Operating Determinations ............................4 Rigging .................................... 4 Connection with the mains............................5 Return Procedure ................................6 Claims ....................................6 Description of the device ..............................7 Front ....................................7 Back .................................... -
Page 3: Warning
Save the carton and all packing materials. In the event that a fixture must be returned to the factory, it is important that the fixture be returned in the original factory box and packing. Your shipment includes: ● Showtec Sunstrip LED ● 2 mounting brackets incl. screws ●... - Page 4 ● If your Showtec device fails to work properly, discontinue the use immediately. Pack the unit securely (preferably in the original packing material), and return it to your Showtec dealer for service.
-
Page 5: Operating Determinations
Sunstrip LED ● Repairs, servicing and electric connection must be carried out by a qualified technician. ● WARRANTY: Till one year after date of purchase. Operating Determinations ● This device is not designed for permanent operation. Consistent operation breaks will ensure that the device will serve you for a long time without defects. -
Page 6: Connection With The Mains
Sunstrip LED The Sunstrip LED can be placed on a flat stage floor or mounted to any kind of truss with clamps. Improper installation can cause serious injuries and/or damage of property! Connection with the mains Connect the device to the mains with the power-plug. Always check if the right color cable is connected to the right place. -
Page 7: Return Procedure
Sunstrip LED Return Procedure Returned merchandise must be sent prepaid and in the original packing, call tags will not be issued. Package must be clearly labeled with a Return Authorization Number (RMA number). Products returned without an RMA number will be refused. Highlite will not accept the returned goods or any responsibility. Call Highlite 0031-455667723 or mail aftersales@highlite.com and request an RMA prior to shipping the... -
Page 8: Description Of The Device
Sunstrip LED Description of the device Features The Sunstrip LED is the successor of the already popular Sunstrip Active. Thanks to Tungsten mode, the Sunstrip LED works like conventional bulbs while it is still possible to operate it in Warm white, Cool white or in a combination of both. -
Page 9: Back
Sunstrip LED Back Fig. 02 04) Cooling fan 05) Safety eye 06) 5-pin DMX signal connector OUT 07) 3-pin DMX signal connector OUT 08) Pro power connector Gray OUT 09) Ground/earth connection 10) OLED display + control buttons 11) Fuse T2AL/250V 12) 3-pin DMX signal connector IN 13) 5-pin DMX signal connector IN 14) Pro power connector Blue IN... -
Page 10: Control Modes
Sunstrip LED Control Modes There are 4 modes: ● Auto ● Manual ● Master/Slave ● DMX-512 (1CH, 2CH, 3CH, 10CH, 20CH) One Sunstrip (Auto, Manual) 01) Fasten the effect light to a firm trussing. Leave at least 0,8 meter on all sides for air circulation. 02) Always use a safety cable (ordercode 70140 / 70141). -
Page 11: Multiple Sunstrips (Dmx Control)
Sunstrip LED Multiple Sunstrips (DMX Control) 01) Fasten the effect light to a firm trussing. Leave at least 0,8 meter on all sides for air circulation. 02) Always use a safety cable (ordercode 70140 / 70141). 03) Use a 3-pin/5-pin XLR cable to connect the Sunstrips and other devices. 04) Link the units as shown in fig. -
Page 12: Fixture Linking
Sunstrip LED Fixture Linking You will need a serial data link to run light shows of one or more fixtures using a DMX-512 controller or to run synchronized shows of two or more fixtures set to a master/slave operating mode. The combined number of channels required by all the fixtures on a serial data link determines the number of fixtures the data link can support. -
Page 13: Control Panel
Sunstrip LED The Sunstrip LED can be operated with a controller in control mode or without the controller in stand- alone mode. Control Panel A) OLED display MENU button C) UP button D) DOWN button ENTER button Fig. 05 Control Mode The fixtures are individually addressed on a data-link and connected to the controller. -
Page 14: Menu Overview
Sunstrip LED Menu Overview Ordercode: 30752... - Page 15 Sunstrip LED Ordercode: 30752...
-
Page 16: Main Menu Options
Sunstrip LED Main Menu Options 01) Upon start-up, the display will show the current version of the device. 02) After 3 seconds, the display will show the current device status. 03) You can now view whether or not the Sunstrip receives a DMX signal. You can also view the currently selected operation mode, the DMX starting address, the dimmer mode and the dimming curve type. -
Page 17: Dmx Address
Sunstrip LED 1. DMX Address In this menu you can set the desired DMX starting address. 01) Press the ENTER button to open the menu. The display will show: 02) Press the UP/DOWN buttons to set the desired DMX address. The adjustment range is between 001– 512. -
Page 18: Dimmer Mode
Sunstrip LED 4. Dimmer Mode In this menu you can set the dimmer mode. 01) Press the UP/DOWN buttons to choose one of the 3 dimmer modes: ● WARM ● COOL ● TUNGSTEN 02) Press the ENTER button to confirm. 5. -
Page 19: Dimmer Speed
Sunstrip LED 6. Dimmer Speed In this menu you can set the dimmer speed. 01) Press the UP/DOWN buttons to choose one of the 2 dimmer speeds: ● NORMAL ● SMOOTH 02) Press the ENTER button to confirm. 7. Control Mode In this menu you can set the desired control mode. -
Page 20: Auto Control
Sunstrip LED 7.3. Auto Control In this menu you can set the built-in programs and a fade. 01) Press the UP/DOWN buttons to choose one of the 10 built-in programs or the fade. 02) Press the ENTER button to confirm. 03) Press the UP/DOWN buttons to set the program speed. -
Page 21: Settings
Sunstrip LED 8. Settings In this menu you can adjust the device’s settings. 01) Press the UP/DOWN buttons to choose one of the 6 submenus: ● DMX FAIL ● DISPLAY ● TEMPERATURE ● FIXTURE HOURS ● FIRMWARE VERSION ● FACTORY RESET 02) Press the ENTER button to confirm. -
Page 22: Temperature
Sunstrip LED 03) Press the UP/DOWN buttons to change values. 04) Press the ENTER button to confirm. 8.3. Temperature In this menu you can view the device’s temperature. 8.4. Fixture Hours In this menu you can view the device’s total operation hours. 8.5. -
Page 23: Dmx Channels
Sunstrip LED DMX Channels 1 channel Channel 1 – Dimmer intensity (All LEDs) 0-255 Gradual adjustment, from dark to brightest 0-100% 2 channels Channel 1 – Dimmer intensity Warm (All LEDs) 0-255 Gradual adjustment, from dark to brightest 0-100% Channel 2 – Dimmer intensity Cool (All LEDs) 0-255 Gradual adjustment, from dark to brightest 0-100% 3 channels... -
Page 24: Channels
Sunstrip LED Channel 9 – Dimmer intensity (LED 9) 0-255 Gradual adjustment, from dark to brightest 0-100% Channel 10 – Dimmer intensity (LED 10) 0-255 Gradual adjustment, from dark to brightest 0-100% 20 channels Channel 1 – Dimmer intensity Warm (LED 1) 0-255 Gradual adjustment, from dark to brightest 0-100% Channel 2 –... -
Page 25: Maintenance
Sunstrip LED Channel 17 – Dimmer intensity Warm (LED 9) 0-255 Gradual adjustment, from dark to brightest 0-100% Channel 18 – Dimmer intensity Cool (LED 9) 0-255 Gradual adjustment, from dark to brightest 0-100% Channel 19 – Dimmer intensity Warm (LED 10) 0-255 Gradual adjustment, from dark to brightest 0-100% Channel 20 –... -
Page 26: Troubleshooting
Suspect three potential problem areas as: the power supply, the LEDs, the fuse. 01) Power supply. Check if the unit is plugged into an appropriate power supply. 02) The LEDs. Return the Sunstrip to your Showtec dealer. 03) The fuse. Replace the fuse. See page 24 for replacing the fuse. - Page 27 Sunstrip LED Problem Probable cause(s) Remedy One or more No power to the fixture. ● Check if power is switched on and fixtures do not cables are plugged in. function at all. Primary fuse blown. ● Replace fuse. Fixtures reset The controller is not connected.
-
Page 28: Product Specifications
Sunstrip LED Product Specifications Model: Showtec Sunstrip LED Input voltage: 110–240 V AC, 50/60 Hz Power consumption: 120 W DMX linking: 30 pcs Fuse: T2AL/250V Dimensions: 1085 x 146 x 166 mm (LxWxH) (incl. brackets) Weight: 7 kg Operating and Programming:... -
Page 29: Dimensions
Sunstrip LED Dimensions Ordercode: 30752... -
Page 30: Notes
Sunstrip LED Notes Ordercode: 30752... - Page 31 Sunstrip LED Ordercode: 30752...
- Page 32 ©2019 Showtec...
Need help?
Do you have a question about the Sunstrip LED V1 and is the answer not in the manual?
Questions and answers