Stabilizer Firmware Update - Zhiyun CRANE 3S User Manual

Calibration and Firmware Upgrade
Method 1: Connect the USB port on the stabilizer with a computer via a Type-C USB
cable to conduct the stabilizer firmware update and online calibration.
1. Open ZHIYUN official website www.zhiyun-tech.com. Click "Download"-"Firmware"
on the homepage. Find and download the USB driver and the latest firmware for
your stabilizer model. (For Mac and WIN10, you don't need to download USB
driver.)
2. Install the downloaded driver.
3. Power on the stabilizer and enter standby mode.
4. Launch "Zhiyun Gimbal Tools", then conduct firmware update according to the
operations in the firmware update tutorial.
Method 2: Update via APP. According to the method introduced in "APP Operations",
connect the stabilizer to APP. If a firmware update prompt pops up on APP, please tap
to update.
Before the firmware update, please ensure that the power level of both stabilizer
and phone remain above 50%. Do not exit APP or move APP to the background.
Please pay attention to the APP prompt information.

Stabilizer Firmware Update

24