Table of Contents
Advertisement
Steps
1. Connect the battery cable to the system board, if applicable.
2. Connect the LED cable to the system board, if applicable.
3. Align the screw holes on the base cover with the screw holes on the palm-rest and keyboard assembly, and then snap the base cover
into place.
4. Replace the six screws (M2x7) that secure the base cover to the palm-rest and keyboard assembly.
5. Tighten the four captive screws that secure the base cover to the palm-rest and keyboard assembly.
Next steps
1. Follow the procedure in
Light bar
Removing the light bar
Prerequisites
1. Follow the procedure in
2. Remove the
base
cover.
NOTE:
Please note that this procedure is only applicable for 80 W systems.
16
Removing and installing components
After working inside your
computer.
Before working inside your
computer.
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the G5 5500 and is the answer not in the manual?
Questions and answers