Environmental protection is a fundamental corporate strategy of the Bosch Group. DHW heating........8 The quality of our products, their economy and environmental safety are Adjust .
A manufacturer's warranty of 2 years is provided for EasyControl. Data privacy Declaration of Conformity (Europe) Information about data protection can be found on the EasyControl site Hereby, Bosch Thermotechnik GmbH, declares that the radio under Data protection. equipment with type Thermostat AA are in compliance with Directive 2014/53/EU.
Assembly ▶ EasyControl takes over the time setting of the Bosch server. If there is Minimum requirements for installation: no connection to the server, EasyControl can only be put into ▶ 2-wire cable to a heat source, which is suitable for use with operation in manual operation.
Connect EasyControl with the orange 0010018154-002 connector at the orange terminal. • Bosch • heat source appliance without a visible connection for the Fig. 8 Start screen controller. The heat source must be opened by a recognized installer.
The temperature can now only be set in manual operation on the performed automatically. It is possible that, when delivered, touch screen. Connection to the app or Bosch site is not possible. EasyControl does not yet have the current software version and does not Possible connection difficulties, ...
Operation Electronic thermostatically controlled radiator valve Operational symbols EasyControl can establish a wireless connection with up to 19 Bosch The space for operational symbols [5] may contain the following electronic thermostatically controlled radiator valves (accessories). symbols: In this way different temperatures can be set in different rooms.
Operation Parental lock Away setting The screen can be disabled and enabled using the Easy-Control app, the function is deactivated as standard. 0010018163-001 Fig. 17 Selecting “Not at home” or “At home” The “Away” setting is used to show, whether one is at home or not. The set temperature is lowered in “Away from home status”...
Faults WLAN setting Reset (factory settings) Information about the current software version 6.9.1 WLAN setting ▶ Press the WLAN symbol [1] to change the WLAN network or password. 6.9.2 Reset All personal settings will be lost if the factory settings of the EasyControl are restored.
Product (ErP) form and the ErP Data Label sticker, which are required for is too high or systems. too low Supplier is “Bosch, Bosch Group”, the model is “EasyControl”. The touch If the touch screen does not detect anything for more screen is not than 5 minutes, it automatically switches itself off.
Appendix merely link (or bind by name) to the interfaces of, the Work and Name of OSS Version of OSS Name and URL of origin and Derivative Works thereof."Contribution" shall mean any work of Component Component Version of additional information authorship, including the original version of the Work and any License (copyright, copyleft and...
Appendix reproduction, and distribution of the Work otherwise complies with the DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR conditions stated in this License. CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, 5. Submission of Contributions. BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR Unless You explicitly state otherwise, any Contribution intentionally SERVICES;...
Page 13
Appendix Contributor, if any, and such derivative works, in source code and object commercial product offering, such Contributor ("Commercial code form. Contributor") hereby agrees to defend and indemnify every other Contributor ("Indemnified Contributor") against any losses, damages b) Subject to the terms of this Agreement, each Contributor hereby and costs (collectively "Losses") arising from claims, lawsuits and other grants Recipient a non-exclusive, worldwide, royalty-free patent license legal actions brought by a third party against the Indemnified...
Agreement. The Eclipse Foundation is the initial Agreement Steward. The Eclipse Foundation may assign the Bosch protocol language. responsibility to serve as the Agreement Steward to a suitable separate entity. Each new version of the Agreement will be given a distinguishing version number.
Need help?
Do you have a question about the EasyControl CT200 and is the answer not in the manual?
Questions and answers