Drill Locator - Goxawee G4007 Manual

After the flexible shaft test is no problem, install the accessories:
6. "L" Spanner inserts the hole at
the head of the shaft and press it
to open the collet nut
B. Drill Locator: Control the depth of drilling
1. Unscrew the plastic nut and install the
drill bit
7. Insert the accessory, press "L"
spanner and tighten the collet nut with
the small wrench
2. Tighten the drill locator on the head of the
grinder, adjust the scale according to the drilling
depth, and tighten the screws by hand.