13. Reinstall the computer in the dock, the UPS battery will reconnect
14. Press the Power button on the front of the device.
15. If adding or removing a defroster, it is very important to wait a few moments
16. Close any open control Panel windows.
17. The computer is ready to use.
4
automatically.
after powering on the device for the computer to detect the defroster. Once
detected, you can update the configuration:
•
For the VM3: select Start > Settings > Control Panel > Peripherals and tap
the Test button
•
For the VM3A: select Settings > Defroster, modify the defroster parameters,
then tap Update to apply the changes and tap OK.
Thor VM3/VM3A Front Panel Replacement Instructions