Table of Contents Important Safety Instructions ................... 1 Connecting the Monitor to the Base ................ 2 Wall Mount Installation Instructions .................4 External Control Buttons ..................5 OSD Function Introductions ..................7 Main Menu ......................9 Color Setting ......................10 Picture Quality Setting ..................... Display ........................
• Monitor -to -PC signal cable is frayed or damaged. • Liquid spills onto the LCD monitor or the monitor is exposed to rain. • The LCD monitor or case is damaged. Cooler Master LCD Monitor User Manual-1...
Flashing blue light indicates the monitor is under Standby Mode. FreeSync Switch to the Game Mode to activate FreeSync This function enables the graphic source supporting FreeSync to adjust the screen refresh rate of the monitor in a dynamic manner. Cooler Master LCD Monitor User Manual-5...
Page 8
Back DP (1.2): 165Hz (Overclock 200Hz), Adaptive Sync supported under 1920X1080 HDMI (2.0): 165Hz, Adaptive Sync supported under 1920X1080 HDMI (1.4): 120Hz, Adaptive Sync supported under 1920X1080 Cooler Master LCD Monitor User Manual-6...
Fastest Response Time Override Normal Fast Normal Picture Quality Setting High Super Resolution Middle Dynamic Luminous Control. Wide Screen Aspect Ratio Wide Screen Display Auto Normal LED Mode (Rear) Normal Flicker Crosshair Transparency 0-100 Cooler Master LCD Monitor User Manual-7...
Page 10
TopLeft PIP Position TopRight BottomRight BottomLeft Swap 中文 English 한국의 РУССКИЙ Language English Español 日本語 Francais 繁體中文 OSDH-Position 0~100 OSDV-Position 0~100 OSD Transparency 0~100 OSD Time Out 5~100 Normal OSD Rotation Normal Other Reset Cooler Master LCD Monitor User Manual-8...
Enter the Brightness/Contrast menu to adjust the brightness, contrast and dynamic contrast functions. 1.Brightness: Adjust the brightness between 0 and 100. 2.Contrast: Adjust the contrast between 0 and 100. 3.Dynamic Contrast: Enable or Disable the dynamic contrast function. Cooler Master LCD Monitor User Manual-9...
4.Low Blue Light: Adjust the low blue light setting value between 0 and 100. 5.Hue: Adjust the hue for the three colors red, green and blue. 6.Saturation: Adjust the saturation for the three colors red, green and blue. Cooler Master LCD Monitor User Manual-10...
Enter the Display menu to adjust functions including Aspect Ratio and LED Mode (Rear) etc. 1. Aspect Ratio: This can be set to Wide Screen, 4:3, 1:1 and Auto. 2. LED Mode (Rear): This can be set as Normal, Off or Flicker. Cooler Master LCD Monitor User Manual-11...
Page 14
3.PIP Size: Allows adjusting of PIP display size as Small, Medium or Large. 4.PIP Position: Allows adjusting of PIP display position as TopRight, TopLeft, ButtomRight or BottomLeft. 5.Swap: Turns the screen swap function On or Off. Cooler Master LCD Monitor User Manual-12...
5.OSD Time Out: Set the display time of the OSD between 0 and 100. 6.OSD Rotation: Enables the rotate OSD function; it can be adjusted to Normal, 90 degrees, 180 degrees and 270 degrees etc. Cooler Master LCD Monitor User Manual-13...
If FreeSync (Adaptive Sync) is turned On under the 144Hz refresh frequency, it may result in flickering issues or other opposite effects under certain scenario modes. 3.Reset: Selecting this allows restoring all setting values back to the default factory status. Cooler Master LCD Monitor User Manual-14...
HDMI, HDMI high defini�on mul�media interface and the HDMI logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the U.S. and other countries. If you have any usage problems, please visit: h�ps://www.coolermaster.com/warranty Cooler Master LCD Monitor User Manual-15...
Internal and external cases (External case, case, support…) Main Board Other Circuit Boards LCD Display Panel Speakers Base Power Supply (Switching adapter) Accessories (Power cable, HDMI signal cable…) Other fixed components (Screws, clamps, latches) Cooler Master LCD Monitor User Manual-16...
Need help?
Do you have a question about the GM27-CF and is the answer not in the manual?
Questions and answers