NEC Versa LX Manual page 9

Verifying the Data Transfer
When the copy process completes, a dialog box appears asking if you want to see the results.
Click Yes to see a graphical and text representation of the disk structure. Otherwise, select
"Exit." At the prompt stating that the system needs to be rebooted, power off the system.
Remove the VersaBay III cradle from the system. Power on the system. The system boots from
the new internal hard disk drive and is ready for use.
Maintain the information on the disk drive as a backup copy until you are satisfied that the disk
copy process is complete or the data becomes outdated.
Your original disk drive can be used as a second drive in the VersaBay III.
Note
(NEC Versa LX systems only.) For hard disks, 12-GB or larger, the restore process
creates two partitions, not a single partition as shipped from the factory. If you want to create a
single partition for your hard disk drive, you should run the Partition Magic software (version 4.1
or higher) after the restore process completes. Partition Magic can either be downloaded from a
URL address provided by NECC Customer Support, or installed from the Application and Driver
CD that ships with your system (not available on all CDs). See the document, Restoring a 12-GB
or Larger Hard Disk Drive, which shipped with your hard disk, for detailed instructions on using
the Product Recovery CD and/or creating a single partition with Partition Magic.
NEC Versa LX and LXi Hard Disk Drive Upgrade Kit 9