CONTENT Important Safety Tips Precautions...........................3 Product Introduction Main Parts and Components..................4 Control Panel and Remote Controller.................6 Product Operation Placement and Installation.....................7 Operation Method......................9 Clean and Maintenance Drainage Method......................10 Maintenance........................11 Common Failures and Diagnosis Intelligent Error Detection....................12 Fuse Parameters........................12 Troubleshooting.......................13 www.SereneLifeHome.com...
Important Safety Tips Precautions Please read the Manual carefully before operating the machine: • This machine is for household use only. • This machine is for indoor use only. Please place it in dry environment. • Check power cord frequently. When power cord, plug or A/C is damaged, please don’t operate.
• This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
Control Panel and Remote Controller TIMER MODE SPEED POWER Cool High 1. Power key Press the key to turn ON/OFF the A/C. 2. Mode key Press the key to choose cool, fan and dry. 3. Temperature/ time adjusting key Press the key at cooling mode to increase/ reduce the setting temperature;...
Product Operation Placement and Installation Placement • Place it at even and dry place, and keep it at least 50cm away from its surrounding object. Installation • Screw the exhaust duct assembly in the air outlet behind the panel (counterclockwise). www.SereneLifeHome.com...
Page 8
• Insert the air exhaust hose into the window sealing plate, adjust opening width of window so that the window can match with the sealing plate properly; length of the sealing plate is adjustable. Incorrect Installation • It’s important to keep the exhaust duct smooth. Incorrect installation will a ect work of the A/C.
OPERATION METHOD Cooling Mode • When the A/C enters cooling mode automatically or cooling mode is selected after power ON, the cooling indicator lamp lights up. • Press Up/Down key to adjust setting temperature (16°C~30°C)(60°F~86°F). • Press Speed key to choose High/Mid/Low speed. Fan Mode •...
Sleep mode (optional function) • Under cool mode, pressing sleep mode key on the remote controller or pressing time key and down key together on the machine, it will start sleep mode with low wind speed and can’t be adjusted. Pressing the sleep mode key again or pressing time key and down k ey together on the machine to quit the sleep mode.
MAINTENANCE Notice: In order to avoid electric shock, please turn o the A/C and unplug before maintenance or repair. CLEANING • Unplug before cleaning. • Wipe with soft semi-dry cloth. Don’t use chemical reagent, such as benzene, alcohol and gasoline etc; otherwise surface of the A/C and even the whole A/C will be damaged.
SEASONAL CLEANING If the A/C will not be used for a long time: • Pull out the water plug to drain. • Run the A/C in fan mode for 2H till the inside is dry. • Turn o the A/C and unplug. •...
Troubleshooting In case of any of the following trouble, please contact professional maintenance personnel in time. TROUBLE CAUSE SOLUTION The A/C doesn’t No display Reset circuit breaker on AC cord work The display panel displays Restart the A/C after power off and “FL”...
Need help?
Do you have a question about the SLPAC8 and is the answer not in the manual?
Questions and answers