Epg; Recording Option; Time-Shift Option - Philips 5000 Series User Manual


Restore Default: Press OK key to enter
Restore Default. ALL setup and
channels will be reset.
Tip
 Press key to return main menu.

EPG

Press TV GUIDE key on the remote control to
access TV program guide list. (It is available in
DTV Mode)

Record: Press Red key on the remote
control to record the program, then the
recorder menu will show on TV. You can
select channel and record mode, set the
start time and end time; then press OK key
to confirm. Finished record program, the
new task will be appeared in schedule list.

Info: Press Green key on remote control to
view the program information of the
previous day.

Schedule: Press Yellow key on remote
control to view the program information of
the recorded and reminded.
 Remind: Press Blue key on remote control
to remind your program.

Recording Option

In DTV mode, press red point key
remote control. Record option menu will show
on the screen, and the TV system begin
recording now.
Press key on the remote control to stop and
quit the recording.
After quitting recording, press
the remote control to show the TV recorded list,
you can press Green key on the remote control
to view the file information or delete it by
pressing Red key, and press OK key to play it
normally.
key on the
(start) key on
EN 11
Note
This function need to be connected with

USB device, the USB of FAT32 format
must be used. The USB of NTFS format
does not support recording. The duration
of each recording should be no longer
than 6 hours.
 You can find these files in recorded list
(Utilities-- > Recorded List)
Recording options menu introduction
Play: Play the current video.
FB: Fast back for the video, press
key to play normally.
FF: Fast forward for the video, press
(play) key to play normally.
FB30S: Play backward 30 seconds.
FF30S: Play fast forward 30 seconds.
Pause: Pause the video.
Stop: Stop recording and quit the recording
function.

Time-shift Option

In DTV mode, press
control, time-shift option menu will show on the
screen, and the program is in suspended status.
press key on the remote control to stop and
quit time-shift function. When you leave
program for a short time, time-shift function can
suspend and cache the playing program to U
disk. When you resume playing, the program can
continue to be played.
Time-shift options menu introduction
Play: Play the current video.
FB: Fast back for the video, press
key to play normally.
FF: Fast forward for the video, press
(play) key to play normally.
FB30S: Play backward 30 seconds.
FF30S: Play forward 30 seconds.
Pause: Pause the video.
Stop: Stop and quit time-shift function.
(play)
key on the remote
(play)