Related Manuals for Breville Hot Cup
Summary of Contents for Breville Hot Cup
- Page 1 Breville Hot Cup’s patented design means you only boil one cup of water at a time saving time money and energy...
-
Page 2: Identifying The Parts
Identifying the Parts 1. On/Off button Lights up blue when in the on position. 2. Lid 3. Lid release button Press to open the lid and fill the water tank. 4. Illuminated water reservoir Easy fill water reservoir holds up to 1.5 litres. 5. Heating chamber Boils 250ml of water. - Page 4 Close the lid and position your Hot Cup on the power base. Make sure the on/off switch is in the off position, then plug your Hot Cup in to a mains supply socket. Place a suitable cup or container with a tea bag, coffee, sugar, etc. below the dispensing nozzle.
- Page 6 Repeat steps 3, 4 and 5 until the water has been emptied from your Hot Cup. If your Hot Cup will not be used for an extended period (e.g. if you are on holiday), we recommend that you first empty it. Before using your Hot Cup again, carry out several boil cycles discarding the water each time.
- Page 8 You may need to descale your Hot Cup more frequently if you live in a hard water area. Fill your Hot Cup to the MAX fill level and place an empty cup on the drip tray. Set the on/off switch to the on position and wait for the water to be dispensed into the cup.
-
Page 10: Troubleshooting
Possible Cause Solution The on/off switch will not stay The Hot Cup has not reset The Hot Cup is still too hot in the on position. itself after the boiling cycle. after the last boil cycle. Wait a few seconds for it to cool slightly before trying again. -
Page 11: Important Safety Instructions
Important Safety Instructions Please read these instructions before operating and retain for future use. This product is not suitable for use by children, and may not be suitable for persons requiring supervision unless they receive instruction by a competent person on how to safely use the product. -
Page 12: Connection To The Mains Supply
Connection to the mains supply This appliance is fitted with either a moulded or rewirable BS1363, 13 amp plug. The fuse should be rated at 13 amps and be ASTA approved to BS1362. If the fuse in a moulded plug needs to be changed, the fuse cover must be refitted. The appliance must not be used without the fuse cover fitted. -
Page 13: After Sales Service
After sales service These appliances are built to the very highest of standards. There are no user serviceable parts. Follow these steps if the unit fails to operate: Check instructions have been followed correctly. Check fuse has not blown. Check mains supply is functional. If the appliance will still not operate, return the appliance to the place it was purchased for a replacement. - Page 14 Guarantee This product is guaranteed for a period of 1 year from the date of purchase against mechanical and electrical defects. This guarantee is only valid if the appliance is used solely for domestic purposes in accordance with the instructions provided, that it is not connected to an unsuitable electricity supply, dismantled or interfered with in any way or damaged through misuse.
- Page 16 Vine Mill, Middleton Road, Royton, Oldham OL2 5LN, UK www.breville.co.uk Breville is a registered trademark of Pulse Home Products Limited © Pulse Home Products Limited 92846-2 VKJ142_Iss_3 11/08...
Need help?
Do you have a question about the Hot Cup and is the answer not in the manual?
Questions and answers
How to descale my machine
To descale a Breville Hot Cup water dispenser, follow these steps:
1. Fill the dispenser to the MAX level with water.
2. Place an empty cup on the drip tray.
3. Press the start button and wait for the water to be dispensed into the cup.
4. Add a citric acid-based descaling product to the hot water and close the lid.
5. Place an empty cup on the drip tray and press the start button again.
6. Wait for the water to be dispensed into the cup.
7. Discard the water from the cup.
8. Repeat steps 5-7 as needed to ensure thorough descaling.
Additionally, clean the nozzle and chamber where scale builds up, being careful not to leave descaling chemicals in areas that may affect water taste. Using filtered water can help reduce future scaling.
This answer is automatically generated
Is the dispense adjustable on this modet?