Advertisement
Quick Links
Advertisement
Related Manuals for Evil OMEN 2.0
Summary of Contents for Evil OMEN 2.0
- Page 1 Omen Manual 2.0 6/21/05 9:56 AM Page 1 Paintball Marker Operator’s Manual Version 2.0...
- Page 2 Omen Manual 2.0 6/21/05 9:56 AM Page 2...
- Page 3 PAINTBALL MARKERS ARE NOT TOYS. MISUSE MAY CAUSE S E R I O U S INJURY OR DEATH. EYE PROTECTION WARNING DESIGNED FOR PAINTBALL USE MUST BE WORN BY THE USER AND ANY PERSON WITHIN RANGE. READ THIS OPERATOR’S MANUAL COMPLETELY BEFORE LOADING, PRESSURIZING, OR OPERATING THE EVIL OMEN ™ PAINTBALL MARKER.
- Page 4 BY THE USER AND ANY PERSON WITHIN RANGE. READ THIS OPERATOR’S MANUAL the muzzle and turn marker off when not in use and when in any non-shooting area. COMPLETELY BEFORE LOADING, PRESSURIZING, OR OPERATING THE EVIL OMEN™ Paintball markers with electronic frames have extremely sensitive triggers. Take extra safety PAINTBALL MARKER.
- Page 5 Omen Manual 2.0 6/21/05 9:56 AM Page 8 o p e rating the evil omen m a r k e r o p e rating the evil omen m a r k e r ™ ™ WARNING WARNING WHEN COCKING THE PRESSURIZED MARKER, DO NOT RELEASE THE COCKING...
- Page 6 6/21/05 9:56 AM Page 10 COMPRESSED GAS/AIR COMPRESSED GAS/AIR The EVIL OMEN ™ paintball marker may be powered by anti-siphon CO 2 but it is WARNING recommended that Nitrogen or Compressed Air be used for best performance. THE SAFETY RULES FOR HANDLING COMPRESSED GAS OR AIR MUST BE A COMPRESSED GAS OR AIR CYLINDER IS A PRESSURE VESSEL.
- Page 7 14 inch Driver Barrel with Autococker Threads 2. Velocity of the EVIL OMEN ™ is normally adjusted by rotating the adjusting ring on the regulator. The thread used in this ring is a fine...
- Page 8 ™ Bolt-Powered Cam Feed No Rise Feed Tube System (Patent Pending) Easy Strip Hinged Cam Feed Cover Rear Block EVIL™ Driver Barrel Venturi Style Delrin Bolt Adjustable Recock Pressure (Patent Pending) Charge Port On / Off Safety Switch Indicator LED...
- Page 9 Please read each of the EVIL OMEN ™ 2.0 WARRANTY REGISTRATION following items and initial that you have read and understood it before operating the EVIL OMEN ™ paintball marker: Please fill out entirely this EVIL OMEN ™...
- Page 10 Omen Manual 2.0 6/21/05 9:56 AM Page 18 O M E N 2.0 RECEIVER BARREL DIAG RA M ™ Feed Tube (black) 57775 14a Valve Spring Guide 57773 Cover Plate (black) 57008 Valve Stem 57707 Cover Plate Screw 57704 End Cap O-Ring 57728 (019-70) Pivot Cover (black)
- Page 11 47 Brass Insert 57755 58 Omen Trigger Frame 57002 76 Sear Release Slide 57742 59 Rear Frame Screw (10-32x.5) 10682 77 Evil Jewel 11441 60 Grip Panel Screw (6-32x.375) 10782 78 Nylon Set Screws 10687 61 Front Frame Screw (10-32x1) 57784...
- Page 12 Omen Manual 2.0 6/21/05 9:56 AM Page 22 O M E N 2.0 EVIL DETONATOR DIAG RA M O M E N 2.0 BOARD PROGRA M M I N G ™ ™ OMEN 2.0 Board Programming TURN POWER ON WITH TRIGGER PULLED AND...
- Page 13 ™ battery is a 9 volt rechargeable battery. The battery needs a full 22 hours to charge before it is full. The battery does not come fully charged. For best long term battery life, EVIL recommends you charge your OMEN ™...
- Page 14 Omen Manual 2.0 6/21/05 9:56 AM Page 26 TUNING FROM SCRATCH TUNING (without breaking paint) (without breaking paint) The OMEN ships from the factory already tuned, and with regular cleaning and lubrication should only require pressure regulator adjustments to set the velocity. Every time you adjust the inline regulator, the recock pressure should also be adjusted.
- Page 15 This usually does not mean a complete strip. On the contrary, most warranty calls Marker does not recock during skips • Gas supply is low. originate from improper assembly by the operator. However, do not hesitate to call Evil HQ with • Hammer o-ring (part #46) is dirty or needs lube. questions.
- Page 16 Pursuit Marketing, Inc. (PMI, Inc.), 55 Howard Ave, Des Plaines, warranty repairs are needed. Evil takes pride in manufacturing high quality paintball products for IL 60018 USA; Customer pays shipping charges. Please call PMI, Inc., at 1.800.579.1633 for many years of trouble free enjoyment.
- Page 17 Page 32 EVIL OMEN ™ Paintball Markers manufactured by: Pursuit Marketing, Inc. 55 Howard Ave Des Plaines, Illinois 60018 Phone 1.800.579.1633 847.233.2545 www.evil-paintball.com Please visit www.EVIL-PAINTBALL.com for updates on your EVIL OMEN purchase ™ or to download an up-to-date manual.
Need help?
Do you have a question about the OMEN 2.0 and is the answer not in the manual?
Questions and answers