VIPAR SPECTRA Timer Control Series User Instructions

USER INSTRUCTIONS
Timer Control Series
MODEL: T300
Specifications:
Model: T300 Replacement:
LED Power: 100x3W Max Coverage at 12" Height:
Actual Power Draw: Core Coverage at 12" Height:
212W Max
LED Quantities: Suit for:
100pcs Epiled/Bridgelux LEDs
<
Total Harmonic: 15% Housing Dimensions:
Input Voltage: AC100-240V Item Weight:
Frequency: 50-60Hz Lifespan:
Setting system with Remote
To turn ON/OFF the light.
To save settings for brightness.
Switch to hours/minutes setting.
To setup start-working time for
channel 2.
To setup start-working time for
channel 1.
To setup off-working time for
channel 1.
To setup off-working time for
channel 2.
Setting system with Remote
300W MH
40" x 24"
Step 1. Remove the plastic separator from the battery.
32" x 24"
all types of aqua tank
Step 2. Press to turn on the light.
31.5 x 8.5 x 2.4 inches
15.5 lbs
Step 3. Press , then press
≥100,000 hours
the desired brightness for channel 1. Press
Step 4. Press , repeat step 3 to setup brightness for channel 2 ("CH 2").
Step 5. Press , then press
and , select the desired hour. Press
the minutes.Using
www.viparspectra.com
02
To enter main menus.
To increase value.
Switch to hours/minutes
setting.
To decrease value.
To setup current time of day.
To preview start-working
and off-working time for
channel 1 and channel 2.
or to select "CH 1". Using and
to save settings.
to setup current time of day, the hour will flash. Using
or to save the hour and activate
and , select the desired minutes. Press to save settings.
Step 6. Press , then press to setup start-working time for channel 1, the hour
will flash. Using and , select the desired hour. Press
hour and activate the minutes. Using
to save settings.
Step 7. Press , repeat step 6 to setup off-working time for channel 1.
Step 8. Press , repeat step 6 to setup start-working time for channel 2.
Step 9. Press , repeat step 6 to setup off-working time for channel 2.
Step 10. Press to confirm that the system has saved the desired start-working
and off-working time for channel 1 and channel 2.
Using Suggestions
How high should I mount the light off of the water?
30" ~ 32" long
Tank Size/ L x W
12" wide
Height (Above water) 6" ~ 8"
We do not recommend a single light for more than 24" of width front to back. Please adjust
height according to desired coverage and how well the individual strain of corals takes the
increased brightness.
How should I program my light?
, select
Acclimation period
Stage First week
(3~5 days)
Brightness
5 / 5
(Blue / White)
☆ The brightness of light is determined by the time of day. Pre dawn and dusk would be
low. Mid-day would be higher. And please kindly also gradually increase or decrease the
brightness depending on different kinds of corals and the response from your corals. Most
users don't increase the brightness beyond 80% power.
or to save the
and , select the desired minutes. Press
32" ~ 36" long 36" ~ 40" long
12" ~ 18" wide 18" ~ 24" wide
6" ~ 10" 8" ~ 12"
Next 2 weeks Afterwards
10 / 10 20~30 / 10~20
Read ☆