Merlin POCKETBEAM CUBE 2 Manual

POCKETBEAM CUBE 2
Thank you for purchasing this Merlin Product. Please read the
instruction manual carefully before using the product.
The documentation provided will allow you to fully enjoy all the
features this unit has to offer.
Please save this manual for future reference.
Instructions
The PocketBeam Cube 2 is a light weight projector with a built in
battery that makes it very portable and handy for a variety of uses.

Charging

- Before using the projector please charge it with the micro USB cable
to the charging port at the back of the unit. Use a standard 5V/2A USB
charger while charging the device the led will be red.
It is highly suggested to charge the battery for at least 2 hours the first
time. Ensure the projector is turned off and connect it to the power
charger. Insert the plug of the power charger into the wall outlet to
charge the battery.

Usage

- To turn on the projector long press the power button for 5 seconds. -
- To Switch it off long press the power button for 5 seconds or press
the power button on the remote control.
- Focus can be adjusted using the wheel adjuster on the side of the
projector.
- Keystone and brightness can be changed in the settings menu.

Remote Control

Connecting via Wi-Fi

In the main interface go to "settings". Then select the "Wi-Fi
settings". Here Wi-Fi can be turned on and you can connect with
you network.
1