Advertisement
Quick Links
Quick Installation Guide
Video Installation Guide
https://youtu.be/S9bfh9g6Q9Y
support@cudytech.com
Repeater Mode
Method One: Using WPS button
1
1. Switch the mode selector to Repeater position.
2. Plug RE750 into an electrical outlet near your Wi-Fi router. Power on
and wait until the WLAN LED is flashing.
3. Press and hold RE750's WPS button for 1~2 seconds before release,
then press WPS button of your router.
4. Waiting for them to connect, it may take 2 minutes.
WPS
Press 1~2 seconds
Press 1~2 seconds
5. When successful, all of the 3 Wi-Fi LEDs of RE750 should turn on and
stay solid. And it will create 2 network names which contains the words
of your router's Wi-Fi name and "EXT2G" or "EXT5G", the password is
the same as your router's Wi-Fi.
6. Then plug it to a suitable location(ensure at least 2 Wi-Fi LEDs solid
on), no need to configure again.
Hardware Overview
Method Two: Using Web browser
2
Power ON
1. Switch the mode selector to Repeater position.
2. Plug the Device into an electrical outlet near your Wi-Fi router.
3. Shift the power switch to ON and wait until Wi-Fi LED is flashing.
Connect to the Device
Wired
Turn off the Wi-Fi on your computer and connect it to the LAN port of
Cudy Repeater via an Ethernet cable.
Wireless
1.Disconnect the Ethernet (Wired) connection if using a laptop or PC.
2.Connect your device to extender's Wi-Fi
WPS
Cudy-RE750-5G.
Not connected
Connections are available
Wireless Network Connection
Cudy-RE750
Cudy-RE750-5G
Connect automatically
Power On/Off
1
Mode Selector
2
WPS Button
3
Wi-Fi LED
4
WAN/LAN LED
5
LAN LED
6
Power/WPS LED
7
LAN Port
8
WAN/LAN Port
9
Reset Button
10
Configure
1. Launch a web browser and type http://192.168.10.254/ (or
http://ap.setup/) in the address field. Enter admin for password to
login.
2. Below picture will pop up automatically if it is your first time to
configure , or you should click Wizard to make it show up.
Cudy-RE750 or
Connect
Default Parameters
Web Setup: http://ap.setup/
Default IP: http://192.168.10.254/
Password: admin
SSID1:Cudy-RE750
SSID2:Cudy-RE750-5G
Technical Support
support@cudytech.com
Wi-FI Range Extender
admin
English
Login
Repeater Wizard
Repeater Mode:
Bridge
Connect to:
Wi-Fi Password:
Extended 5G:
Connect
Select a Wi-Fi
Manually enter
Cudy-XXXX
Cudy-XXXX-5G
Cudy-Guest
Advertisement
Related Manuals for Cudy RE750
Summary of Contents for Cudy RE750
- Page 1 Press 1~2 seconds Extended 5G: Connections are available 5. When successful, all of the 3 Wi-Fi LEDs of RE750 should turn on and Connect stay solid. And it will create 2 network names which contains the words Wireless Network Connection of your router's Wi-Fi name and "EXT2G"...
- Page 2 Wi-Fi LEDs are ON. If the signal is weak, relocate it closer to the router to achieve better quality. Note: By default, RE750 will create a network name which contains the words of your router's WiFi name and "EXT2G" or "EXT5G", the password is the same as your router‘s Wi-Fi.
Need help?
Do you have a question about the RE750 and is the answer not in the manual?
Questions and answers