Page 1
Basketball System S002217-2 Instruction Manual WARNING! Read all instructions thoroughly before attempting to install or assemble this equipment. Assembly should be done by adults only. Two adults are recommended. Please readjust product to the lowest height and store it safely when not in use or before bad weather and severe wind.
10. This basketball system is for domestic use only. 11. Action recommends filling the base with sand. If you choose to fill the base with water - make sure you ALWAYS check for leaks. Any leaks will lessen the amount of water in the base and lower its weight.
Part No. Description Part No. Description Support Arm Backboard Axle Axle Support Arm Wheels Base Plastic Knob Bottom Pole Pole Collar Middle Pole Base Cap Top Pole NOTE: Please check the quantity of each piece before assembly. S002217-2 Basketball System...
Parts List (cont) HARDWARE Part No. Description Nut M8 Nut M10 Washer M6 Washer M8 Washer M10 Bolt M6 x 16mm Bolt M8 x 20mm Bolt M10 x 25mm Screw M6 x 20mm Bolt M10 x 85mm S002217-2 Basketball System...
Page 5
Parts List (cont) Part No. Description Bolt M8 x 90mm Bolt M8 x 90mm Bolt M8 x 80mm Brackets TOOLS REQUIRED 19mm 17mm 14mm 13mm 10mm S002217-2 Basketball System...
Page 6
Insert the long Axel 8 into the lowest set of holes of Bottom Pole 4. Now insert the short Axel 9 into the next set of holes above. Slide wheels 11 onto each side of Axel 8. S002217-2 Basketball System...
Page 7
Axle 9 slots into the grooves at the top of the Base 3. See below image. Using Bolt K, Washer D and Nut A, fix the Support Arms 7 to the Botom Pole 4 in the holes provided. S002217-2 Basketball System...
Page 8
Attach the net to the rim by looping the net over the metal hooks as per below image. Fix the Ring to the Backboard Using Bolt H, Washer E attach the Rim 2 to the Backboard 1. DO NOT fix in place at this stage. Complete after the next step. S002217-2 Basketball System...
Page 9
Insert the top Pole 6 into the upper Middle Pole 5 so that it protrudes out at the top. Ensure that this step is complete before moving to the next step. S002217-2 Basketball System...
Page 10
Align the end of Support Arm 10 with the top hole provided on Top Pole 6 and the Brackets N. Fix this in place using Bolt J, Washer E and Nut B. Finish by plugging Top Pole 6 with the Pole Collar S002217-2 Basketball System...
Page 11
Maintain this position and roll the system to the desired location. Gently lower the base and stand the pole upright. ALWAYS ensure that the new location is stable and safe. S002217-2 Basketball System...
2/24 Anderson Road, Smeaton Grange, NSW 2567 – if mailing please include your contact details. A service representative will then assist you in the appropriate action to be taken. For efficient processing of your enquiry please have proof of purchase, the date of purchase and the retailer name you purchased the item from, and the brand on the product.
Need help?
Do you have a question about the S002217-2 and is the answer not in the manual?
Questions and answers