Table of Contents
Related Manuals for Stermay HT-782
Summary of Contents for Stermay HT-782
- Page 1 SUP ELECTRIC AIR PUMP SUP ELECTRIC AIR PUMP Intelligent DC Electric Pump HT-782 Operation Instructions Please read the operation instructions carefully before using this product. Please operate in the correct way based on complete understanding.
-
Page 2: Table Of Contents
SUP ELECTRIC AIR PUMP I. Product Introduction Thank you for purchasing this product, HT-782 is an intelligent DC electric pump with the preset pressure LCD screen, which can be used for inflatable tent, SUP, etc. Thanks to the intelligent pressure system, for example, if a pressure value is preset, when the pressure reaches the preset pressure value, the pump will automatically stop inflating. -
Page 3: Safety Instructions
HT-782 DC12V HT-782 DC12V IV. Safety Instructions V. Inflation Operation Connect the end with flexible conduit adaptor （11）of the hose with the Warning: In order to reduce the risk of injury, please keep children away air pump inflation inlet (1), and twist clockwise to tighten it, as Figure 1. -
Page 4: Deflation Operation
HT-782 DC12V HT-782 DC12V Please don't use this air pump if any part is damaged, and please contact Notice: The factory set pressure value of the air pump is 10PSI with the professional personnel to repair it. (10PSI=0.689BAR), and at the time of the secondary use, the set This product shall not be exposed to the rain or immersed in water. -
Page 5: List Of Accessories
SUP ELECTRIC AIR PUMP I. Product Introduction Thank you for purchasing this product, HT-782 is an intelligent DC electric pump with the preset pressure LCD screen, which can be used for inflatable tent, SUP, etc. Thanks to the intelligent pressure system, for example, if a pressure value is preset, when the pressure reaches the preset pressure value, the pump will automatically stop inflating. -
Page 6: Safety Instructions
HT-782 DC12V HT-782 DC12V IV. Safety Instructions V. Inflation Operation Connect the end with flexible conduit adaptor （11）of the hose with the Warning: In order to reduce the risk of injury, please keep children away air pump inflation inlet (1), and twist clockwise to tighten it, as Figure 1. -
Page 7: Deflation Operation
HT-782 DC12V HT-782 DC12V Please don't use this air pump if any part is damaged, and please contact Notice: The factory set pressure value of the air pump is 10PSI with the professional personnel to repair it. (10PSI=0.689BAR), and at the time of the secondary use, the set This product shall not be exposed to the rain or immersed in water.
Need help?
Do you have a question about the HT-782 and is the answer not in the manual?
Questions and answers