Installation - Glacier bay ROCARA ROCVGY4222D Use And Care Manual

Installation

1
Installing the backsplash (optional)
□ Wipe off the area of the vanity (A) top where the
backsplash (B) will sit using a clean rag.
□ Apply a line of silicone onto the vanity (A) top along the
back edge.
□ Align the backsplash (B) with the back edge. Slowly lower
it onto the top and gently press to adhere.
□ Wipe away any seeping silicone from underneath the
backsplash (B) with a clean rag.
3
Removing the drawers (optional)
□ Fully extend the drawer.
□ Locate the small black attachment clip on the side of the
glide.
□ Simultaneously lift the left side clip up and push the right
side clip down to pull the drawer out of the vanity (A).
2
Installing the shelves
□ Insert four shelf pins (AA) into the four pre-drilled holes at
the desired height inside the vanity (A).
□ Slide the shelf (C) into the vanity (A) above the pins (AA).
B
A
4
AA
A
C