Intepro systems ELR 10000 4U Series Operating Manual page 49

IF Settings
Node Address
Function Tag
Location Tag
Installation Date
Description
Manufacturer ID
Ident number
IF Settings
DHCP
IP address
Subnet mask
Gateway
DNS address
Port
Host name
Domain
Speed / Duplex Port 1 Manual selection of transmission speed (10MBit/100MBit) and duplex mode (full/
Speed / Duplex Port 2 Different Ethernet port settings for 2-port modules are possible, as these include
IF Settings
Host name
Domain name
Function Tag
Location Tag
Installation Date
Description
Station Name
Intepro Systems
Description
Selection of the Profibus or node address of the device within range 1...125 via
direct input
String input box for a user-definable text which describes the Profibus slave function
tag. Max. length: 32 characters
String input box for a user-definable text which describes the Profibus slave location
tag. Max. length: 22 characters
String input box for a user-definable text which describes the Profibus slave instal-
lation date tag. Max. length: 40 characters
String input box for a user-definable text which describes the Profibus slave.
Max. length: 54 characters
Registered manufacturer ID with the Profibus organization
Product identification number, same as in the GSD file
Description
The IF allows a DHCP server to allocate an IP address, a subnet mask and a gate-
way. If no DHCP server is in the network then network parameters will be set as
defined below.
This option is activated by default. An IP address can be manually allocated.
Here a subnet mask can be defined if the default subnet mask isn't suitable.
Here a gateway address can be allocated if required..
Here the addresses of the first and second Domain Name Servers (DNS) can be
defined, if needed.
Range: 0...65535. Default port:
Default port: 5025 = Modbus RTU
Reserved port: 502 = Modbus TCP
User definable host name (default: Client)
User definable domain (default: Workgroup)
half). It's recommended to use the "Auto" option and only revert to another option
if Auto fails.
an Ethernet switch
Description
Free choice of host name (default: Client)
Free choice of Domain (default: Workgroup)
String input box for a user-definable text which describes the Profinet slave function
tag. Max. length: 32 characters
String input box for a user-definable text which describes the Profinet slave location
tag. Max. length: 22 characters
String input box for a user-definable text which describes the Profibus slave instal-
lation date tag. Max. length: 40 characters
String input box for a user-definable text which describes the Profibus slave. Max.
length: 54 characters
String input box for a user-definable text which describes the Profinet station name.
Max. length: 200 characters
ELR 10000 4U Series
www.inteproate.com
support@inteproate.com
Page 49