Removal Of A Drawer Suspension - Steelcase Universal Storage Manual

Installation and removal of suspensions

Hide thumbs Also See for Universal Storage:

Table of Contents

Removal of a Drawer Suspension

NOTE: If the upper unit(s) do not have roll-outs,

then it is not necessary to remove the suspensions

or the interlock assembly.

With a pencil (or non permanent marking

method) mark the location of the slide on the case

side.

Remove suspension by turning the bottom of

the suspension outward so the bottom front tab is

disengaged (2a).

Pull upward so the top front tab isdisengaged (2b).

Push slide rearward (2c) and remove slide.

REAR END OF

SUSPENSION

Page 3 of 16

939504872 Rev D

Table of Contents

Do you have a question about the Universal Storage and is the answer not in the manual?