Packing List; Warranty - Paxcess OPTIMUS HJ2052 Manual

Packing list

Item Name Model
Cleaner HJ2052
Power supply unit HJ2052
Cleaner
Manual and safety rope HJ2052
PH: 7.0 – 7.4
Temperature: 10˚C(50˚F) to 35˚C(95˚F)
Cable not fully released
Cable twists or coils
Stuck on main drain outlet
up
of the pool
Power supply unit
Algae in pool floor
Robot does not
Customized pool shape
reach all pool area
Pool filter system and
pump open
Cable not long enough in pool
8
Cleaner
Note
(pc)
In Carton
1
In Carton
1
In Carton
1
Salt: Max 5,000 ppm
Chlorine: Max 2 ppm
Unplug power line and release cable
Turn off pool filter system
Release manually
that cleaner can reach all area
of the season you should brush any algae
from the floor and walls of the pool
OVAL/RECTANGLE/KIDNEY SHAPE, please
specific cleaning
Turn off pool filter system
Release cable
Power cord not
connected well
Damaged during
Robot does not work
Cleaner does not match
local rated voltage
Been blocked
Electric fault
Filter basket need to clean
Robot does not
climb wall Rollers are worn or
consumed too much

Warranty

1.This product is covered by Paxcess warranty for 24 months(only for motor
and Control box kit) from the date of purchase. Consumable parts are
beyond of warranty which includes: Belt/Filter basket/Roller/Side cover
2. This warranty is void if the product has been altered, misused, or has been
repaired by unautho-rized personnel
Email: service@paxcess.com
Free Call: (US) (877)-756-8666 Service Time: Mon.-Fri.: 9:00-17:00 PST
Facebook: @paxcess
The following are excluded from Paxcess warranty cover:
1. Device purchased as 2nd hand, used, or from unauthorized sellers.
liquid.
4. Damage resulted from natural disaster.
5. Damage caused to any 3rd party, person, object, and beyond Statement
you have purchased your unit from a different place, please contact the seller
for return and warranty issues.
Plug power cord and cable line
Contact local vendor
Contact local vendor
Check the impeller or driving system
Contact a local distributor
Clean the filter basket
Replace new roller
9