Rear Shock A5-Re User Manual - TrikExplor F426E User Manual

Rear Shock A5-RE User Manual

Setup
To set the pressure in the main cylinder (valve marked "MP"), use a compatible shock
pump. Remove the valve cap and attach the shock pump according to the pump
manufacturers' specifications. Kind Shock recommends using the KS AIR-8 pump
model for best results.
Recommended air pressure for the main cylinder is 100-150PSI.
DO NOT EXCEED 180PSI.
The negative pressure must not exceed the main pressure.
Maintenance
Your ExaForm rear shock requires periodic service to maintain consist function. This
service should be done at the same interval as a drivetrain cleaning. Please see your
local dealer to have this service performed.
Lubrication: It is recommended that the main shaft be lubricated every 25-30 hours of
use or after a long period of non-use.
Cleaning: Use only warm water and a lint-free soft cloth to wipe down. The use of
solvents, degreasers, waxes and other chemicals may damage the shock and void the
warranty.
12