Page 1
TX-NR535 Ref. No. 4458-R6 032014 AV RECEIVER TX-NR535(B)/(S) MODEL (European, Australian (European, Australian and Asian models) and Asian models) RC-879M Black and Silver models B MDC, B MDF 120V AC, 60Hz B MMK, B MMQ, B MMR 220-240V AC, 50/60Hz B MPP, B MPB, B MPA, S MPP 230V AC, 50Hz...
TX-NR535 DEBUG MODE-1 AUDIO DEBUG MODE-1/5 The operations of DSP and DIR etc are able to checked by the information displayed on FL in this debug mode. This information will help to analysing digital audio no sound trouble. To set in Debug mode Press twice the ON/ STANDBY key while pressing the DISPLAY key.
Page 5
TX-NR535 DEBUG MODE-4 AUDIO DEBUG MODE-4/5 Step-5 1 9 1 9 1 9 1 9 2 0 2 0 2 0 2 0 18. Audio output OK/NG 19. Details of input format 20. Details of the format for the FL display C_SRC_ANA decode OK C_SRC_ANA...
Page 6
TX-NR535 DEBUG MODE-5 AUDIO DEBUG MODE-5/5 Step-7 31. DIR switch sequence number 26. AudioIF DA830 input AUD_IF_I2S_H SEQ_SWITCH_POWEROFF CLOCK_FREQ_88K SEQ_SWITCH_RESET AUD_IF_DSD CLOCK_FREQ_96K SEQ_SWITCH_POWERON_WAIT AUD_IF_I2S CLOCK_FREQ_128K AUD_IF_NET SEQ_SWITCH_CHANGE CLOCK_FREQ_176K SEQ_SWITCH_FREE AUD_IF_SPDIF CLOCK_FREQ_192K AUD_IF_ADC 30. DIR sequence number 32. DAC sequence number AUD_IF_DDDTSHR SEQ_DIG_POWEROFF SEQ_DAC_POWEROFF...
Page 7
TX-NR535 DEBUG MODE-6 HDMI RESOLUTION DISPLAY-1/6 HDMI-related operations can be checked to some extent by displaying HDMI resolution display mode. To enter this mode Hold down DISPLAY button for 3 seconds. Information display will last for about 8 seconds. 9 10 11 12 13 Resolution display 1 0 8 0 p / 1 6 : 9...
Page 8
TX-NR535 DEBUG MODE-7 HDMI RESOLUTION DISPLAY-2/6 Status Input Mode HDMI input 4 4 4 2 4 b i DVI input 4 4 4 2 4 b i 4 4 4 2 4 b i H 1 0 7 4 4 4 2 4 b i Input Color R G B...
Page 9
TX-NR535 DEBUG MODE-8 HDMI RESOLUTION DISPLAY-3/6 9 10 11 12 13 3 8 4 0 x 2 1 6 0 p / Resolution display Press RETURN button Status display 4 2 0 2 4 b i Display list Resolution video Code 3 8 4 0 x 2 1 6 0 p / 3 8 4 0 x 2 1 6 0 p / 3 8 4 0 x 2 1 6 0 p /...
Page 10
TX-NR535 DEBUG MODE-9 HDMI RESOLUTION DISPLAY-4/6 3D Display 10 11 12 13 Resolution display 1 0 8 0 p / 3 D ) Status display F r a m e P a c k i n g 3D format 3D format Frame Packing F r a m e P a c k i n g...
Page 11
TX-NR535 DEBUG MODE-10 HDMI RESOLUTION DISPLAY-5/6 PC RESOLUTION 9 10 11 12 13 Input Resolution display 1 0 2 4 x 7 6 8 p / Press RETURN button Status display H 2 5 6 R G B 2 4 b i Display of Input resolution * * * * x * * * *...
Page 12
TX-NR535 DEBUG MODE-11 HDMI RESOLUTION DISPLAY-6/6 21:9 (1680 x 720 / 2560 x 1080) 9 10 11 12 13 Input Resolution display 2 5 6 0 x 1 0 8 0 p / Press RETURN button Status display R G B 2 4 b i Display of Input resolution * * * *...
TX-NR535 DEBUG MODE-12 SERVICE INFORMATION MODE Displaying Service information This service information display system is helpful in analyze the status when the unit goes into Protect mode and is powered off. Pay attention that the status will change if a button is pushed. 1.
TX-NR535 OPERATION CHECK-1 NOTATION ABOUT ENTERING TEST MODE BY PRESSING BUTTON In this procedure, the following notations are used to simplify explanation of how to press button. e.g.-1 [TV/CD] + [ON/STANDBY] → [BD/DVD] This means "While holding down TV/CD button, press ON/STANDBY button then release both buttons and then press BD/DVD button".
Page 15
TX-NR535 OPERATION CHECK-2 CONFIRMATION OF MODEL NAME AND DESTINATION Model name and destination can be confirmed the following operation. [TV/CD] + [ON/STANDBY] → [DIMMER](RT/PTY/TP) → [TONE] *4 e.g. N R 5 3 5 D x 2 0 0 0 A:Value of AD port of BAND B:Value of AD port of INIT1 C:Value of AD port of INIT2 FL DIS Name Destination A B C D...
Page 16
TX-NR535 OPERATION CHECK-3 CONFIRMATION OF VOLTAGE-DETECTION PROTECTORS. <NOTE> Don't connect load nor short speaker terminals. 1. Do the following operation. 1-1. set the volume level to 25. 1-2. [TV/CD] + [ON/STANDBY] → [BD/DVD] 1-3. [TONE +] to the following test mode. TEST 1-01 2.
Page 17
TX-NR535 OPERATION CHECK-4 CONFIRMATION OF CURRENT DETECTION PROTECTORS 1. Do the following operation. 1-1. set the volume level to 25. 1-2. [TV/CD] + [ON/STANDBY] → [CBL/SAT] 1-3. [TONE - ] to the following test mode. TEST 1-09 2. Confirm that relay is not cut off even if you connect the following load A to the following channels one by one. 3.
Page 18
TX-NR535 OPERATION CHECK-5 CONFIRMATION OF FL TUBE AND LED 1. Do the following operation. [TV/CD] + [ON/STANDBY] → [DIMMER] 2. Confirm that all LEDs and all segments of FL tube are lit. CONFIRMATION OF HEAD PHONE OPERATION Confirm the Listening Mode is automatically switched to "STEREO" mode when headphones plug is inserted into the PHONES jack.
Page 19
TX-NR535 OPERATION CHECK-6 CONFIRMATION OF VIDEO SIGNAL-DETECTION 1. Do the following operation. 1-1. set the volume level to 25. 1-2. [TV/CD] + [ON/STANDBY] → [PC] 1-3. [TONE +] to the following test mode. TEST 5-01 2. Confirm the following indicator lights up on the FL TUBE when the following video signal is input. 3.
Page 20
TX-NR535 OPERATION CHECK-7 TEST 1-xx TEST Config. Master Speaker etc. Output Output Output SW/F/C/S Vol. Relay Frequency Voltage 1-00 SELECTOR MUTING TIME REDUCTION MODE Y/L/L/L 64(Ref) Analog Input Only 1-01 IDLING TIMER Timer start Y/L/L/L Min(Min) IDLING TIMER V Protect (FL) +Max Y/L/L/L Max(Max) F/CS...
Page 21
TX-NR535 OPERATION CHECK-8 TEST 4-xx Auto Measurement Mode TEST DSP Output channel Config. Master Speaker etc. Output Output Vol. Relay Frequency Voltage 4-00 -20dBFS Y/L/L/L 64(Ref) F/CS DSP Gain 1kHz (SW=30Hz) 4-01 -20dBFS Y/L/L/L 64(Ref) F/CS DSP Freq.Response 30Hz (SW=1kHz) 4-02 20kHz -20dBFS...
Page 22
TX-NR535 OPERATION CHECK-9 <NOTES> 1: DSP Thru of Listening Mode outputs L Input signal to L/C/SL, and outputs R Input signal to R/SR/SW. 2: Config. is in order of SW/Front/Center/Surround. 3: Mute is function to stop output(from the channel) by using inner DSP programming. 4: When Listening Mode is DSP thru, an analog SW is changed into the state of SURROUND.
TX-NR535 ADJUSTMENT PROCEDURE ADJUSTMENT OF IDLING CURRENT Applied to the following model. (Model) TX-NR535 Procedure a. Pre-adjustment Set the following registers to minimum position before POWER ON. Set the voltages at the following terminals to the following voltage by adjusting the following registers, under the condition of no input and no load, immediately after POWER ON.
Page 24
The contents of the “Firmware Update” is “Confidential Information” as defined in the applicable “Service Center Agreement”. It is for the exclusive use of Onkyo/Integra Authorized Independent Service Centers. Dissemination or posting of this Firmware Update to any non-authorized individual or company is strictly prohibited.
Page 25
TX-NR535 / HT-R593 FIRMWARE UPDATE-2/2 USB Update (service mode) [Procedure] Overwriting is also possible. 1. Turn on the unit. It takes some time to start after you switch on the unit. 2. Select the USB input source. 3. Connect the USB storage device to USB port on the unit. Wait until Initializing of USB/NET finishes. 4.
Page 26
TX-NR535 TX-NR535 EXPLODED VIEW OVERALL <NOTE> Please use the 3TTB+8B(BC) is screwed to the place that is not specified. 3TTB+8B(BC) WiFi & Bluetooth Module has already been certificated by FCC and IC. A401 Information to the user. U0070 Indicate "Contains FCC ID: TX2-RTL8723AS", "Contains IC: 6317A- RTL8723AS" and following information to the Unit : mm host device installed.
Page 27
DTR-30.6 ONLY (FR-IN2) OPT1 BADG1559 1/2 Z2 R (FR-OUT) BADG1562 1/2 Zone2 in(L-ch) Z2MUTE (IN-R9) Z2 out(L-ch) TONE BAPRC1563 (SUBRC-IN) TX-NR535 Series BAPRC1564 ETHERNET (SBR-IN) TX-NR636 Series RJ-45 DTR-30.6 (FL-OUT) DATA+ Z2 out(R-ch) DATA- VBUS TONE YKF45-0029N BADIS1524 5/5 12V TRIGGER A...
Page 30
TX-NR535/ 636/ HT-RC660/ DTR-30.6 TX-NR535/ 636/ HT-RC660/ DTR-30.6 SCHEMATIC DIAGRAMS-04 ASP SECTION MODEL NO. TX-NR535/ TX-NR636/ HT-RC660/ DTR-30.6 SCHEMATIC DIAGRAM (PART-4) ASP U0010(2/2) U0070 U0080(2/5) U0120 U0070 to P5503A to P5502A to P5504A HDMI TUNER PACK FROM BADG-1559(PART7): TX-NR535 FROM BADG-1559(PART7):TX-NR535 FROM BAPRC-1563(PART-15):TX-NR535 FROM BARF-1450 FROM BADG-1562(PART7):...
Page 36
TX-NR535 TX-NR535 SCHEMATIC DIAGRAMS-10 DISPLAY(PHONE/ LED) SECTION MODEL NO. TX-NR535 SCHEMATIC DIAGRAM (PART-10) DISPLAY SECTION U0041 BLUE MODEL NO. TX-NR535 SCHEMATIC DIAGRAM BASW-1525 D7654 R7605 PURE AUDIO:OTHER BLUETOOTH:T5US (PART-10) DISPLAY SECTION SCB3318E-D2 Q7654 BLUE EXCEPT T5US BAETC-1529 U0044 R7604 D7655 BLUETOOTH TP01 LEDPURE...
Page 37
TX-NR535/ 636/ 737/ 838/ DTR-30.6/ 40.6/ 50.6/ HT-RC660 TX-NR535/ 636/ 737/ 838/ DTR-30.6/ 40.6/ 50.6/ HT-RC660 SCHEMATIC DIAGRAMS-11 POWER SUPPLY(PRI) SECTION MODEL NO. TX-NR535/636/737/838,DTR-30.6/40.6/50.6 SCHEMATIC DIAGRAM (PART-11) PS SECTION THE COMPONENTS IDENTIFIED MARK ARE CRITICAL FOR SAFETY, REPLACE ONLY WITH PART NUMBER SPECFIED. CAUTION VOLTAGE (MEASURED WITH VOLTMETER) IS DC VOLTAGE.
1/37 PAGE TX-NR535(B)MDC <Note> Parts marked by "NSP" are generally unavailable because <Notes> (B) : Black color model they are not in our Master Spare Parts List. <MDC> : 120V NOTE : THE COMPONENTS IDENTIFIED BY THE MARK Canadian/USA/(Mexico) model ! ARE CRITICAL FOR RISK OF FIRE AND ELECTRIC SHOCK.
Need help?
Do you have a question about the TX-NR535 Series and is the answer not in the manual?
Questions and answers