Table of Contents
Advertisement
PERIODIC MAINTENANCE AND ADJUSTMENT
Replacing a rear turn signal
light bulb
1. Remove the turn signal lens by re-
moving the screws.
1. Screw
2. Remove the burnt-out bulb by
pushing it in and turning it counter-
7
clockwise.
3. Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
4. Install the lens by installing the
screws. NOTICE: Do not over-
tighten the screws, otherwise
the lens may break.
EAU42452
Replacing the license plate
light bulb
1. Remove the license plate light cov-
er by removing the bolts.
1. License plate light cover
2. Bolt
2. Pull the license plate light unit up
as shown.
[ECA10681]
1. License plate light unit
EAU42484
3. Remove the license plate light
1. License plate light bulb socket
4. Remove the burnt-out bulb by pull-
1. License plate light bulb
5. Insert a new bulb into the socket.
7-33
socket (together with the bulb) by
turning it counterclockwise, and
then pulling it out.
ing it out from the socket.
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the V-Star 1300 and is the answer not in the manual?
Questions and answers
i cant see the coolant tank or where to add coolant on 2009 yamaha v-star 1300
@Thomas G Dean SR if it's the same as my 2014 vstar 1300 it is under the right passenger foot peg is where u access it u will need a funnel and the main reservoir is below that to see how full it is.