Summary of Contents for Explore Scientific Truss-tube Dobsonian
Page 1
10 inch Truss Tube Dobsonian Telescope Instruction Manual Item #: DOB1045C CR2032 INCLUDED WARNING: WARNING: WARNING: Contains button or coin cell battery. This product can expose you to lead, which is known to the State of Cali- The lens contains lead that may be harmful. Hazardous if swallowed —...
• RISK OF FIRE: DO NOT PLACE DEVICE, PARTICULARLY THE LENSES, IN DIRECT SUNLIGHT. THE CONCENTRATION OF LIGHT RAYS COULD CAUSE A FIRE. • DO NOT DISASSEMBLE THIS DEVICE: IN THE EVENT OF A DEFECT, PLEASE CONTACT EXPLORE SCIENTIFIC CUSTOMER SERVICE DEPARTMENT AT 866.252.3811.
Unboxing and Checking Contents Please Note: We recommend that you keep the original shipping box and packing materials if possible, in case your scope should ever need to be returned for service or warranty purposes. Inside the main package, you will find: –...
Page 5
Unboxing and Checking Contents Figure 3 After removing the trusses, you will find two boxes, Figure 3. The smaller one contains the mirror box and the other contains the rocker box. On the outer left you can see one of the altitude wheels. Remove all parts from the box and unwrap everything.
Assembly We suggest reading all this manual in it’s entirety before attempting assembly. If you are assembling your telescope for the first time, we recommend doing so in a climate-controlled room. First, place the mirror box onto a table to attach the altitude wheels to the mirror box. You will notice that each altitude wheel has two holes.
Page 7
Assembly We recommend marking the position of the altitude wheels so that everything works on the first try next time you assemble the telescope. We recommend using luminescent paint or stickers that enable you to assemble the telescope in complete darkness so your eyes can adapt to the night sky faster. These are available from model- making sources.
Collimation Collimating the optical systems Although the optics in your telescope were carefully collimated in our quality control department prior to leaving our facility, we recommend collimating the telescope after reassembly. The whole procedure is straightforward and should takes only a few minutes after reassembly, if you have numbered your trusses and reassemble your telescope the same way it had been assembled.
Page 9
Collimation Adjusting the main mirror Once the secondary appears round and the mark on the main mirror is centered, check the collimation of the main mirror. If the reflection of your eye and the reflection of the secondary mirror on the main mirror are not concentric, insert the collimating tool into one of the collimation screws that are located on each side of the main mirror, Figure 9.1.
Page 10
Collimation Fine Collimation NOTE: Please take care that the telescope has time to adapt to the ambient temperature before starting collimation – this will need up to 30 minutes (otherwise you will not get a good star image). You may use the fans to speed up this process.
Using Your Dobsonian Your Explore Scientific Dobsonian is a precision optical instrument and should be used with care. Try to avoid exposing your telescope to vibrations because this may cause the telescope to lose collimation. Aligning the viewfinder The red dot that is used by the finder scope is not readily visible during the day. For this reason you should align the finder scope once it is dark.
Observing Astronomical observations The first observations should be performed during dusk so that you get familiar with your new telescope quickly. Always remember never to look at or near the sun! Choose a land object that is easy to find and far away, such as a mountain top.
Page 13
Observing Deep-Sky Objects To locate constellations, stars or other deep-sky objects, it makes sense to use a star chart. We will list a selection of deep sky objects here: Stars are giant objects that mainly consist of gas. Due to the nuclear fusion in their core they radiate energy and shine.
Hints and Tricks Marking with luminous paint: As noted above in the section about assembly it is very helpful to mark the positions of the altitude wheels and the trusses. This helps when assembling the telescope at night and keeps collimation issues at a minimum.
Hints and Tricks Calculating magnification The magnification of a particular telescope configuration is determined by two factors — the focal length of the telescope and the focal length of the eyepiece. You will find the focal length of almost all eyepieces written on the eyepiece body.
Service, Maintenance and Accessories Your Explore Scientific truss Dobsonian is a precision instrument that will provide many years of fun. When you are treating this telescope with the same care as, for example, an expensive camera, it is very unlikely that you will ever need to return it for service or maintenance.
Specifications 10” Truss-tube Dobsonian Technical Specifications Tube: open truss design metal tubing including secondary spider and holder, Upper tube ring: plus focuser and truss connectors Mirror box: with main mirror and truss connectors Trusses: powder coated aluminum with connectors Secondary spider:...
Need help?
Do you have a question about the Truss-tube Dobsonian and is the answer not in the manual?
Questions and answers