Related Manuals for Soleus Air WS3-06E-201
Summary of Contents for Soleus Air WS3-06E-201
- Page 1 Model WS3-06E-201 6,000 BTU WS3-08E-201 8,000 BTU Electronic Saddle Air Conditioner Operating Instructions 4010450 V200220 Air conditioner must be upright for 24 hours prior to operating. This ensures that the compressor will function as intended.
-
Page 2: Purchase Information
PURCHASE INFORMATION Thank you for choosing a Soleus Air Saddle Air Conditioner. This Owner’s Manual will provide you with valuable information necessary for the proper care and maintenance of your new product. Please take a few moments to thoroughly read the instructions and familiarize yourself with all the operational aspects of your new Soleus Air Window Air Conditioner. -
Page 3: Power Cord And Plug
POWER CORD AND PLUG This air conditioner is equipped with an LCDI (Leakage Current Detection and Interruption) power cord and plug as required by US National Electric Code 440.65. This cord consists of a length of shielded flexi- ble cord with no termination on the load side and a LCDI attachment plug on the line side. The LCDI power cord and plug will remove the supply source via electrical disconnect (circuit trip) if the nominal current leakage between the cord shield and either load conductor exceeds a predetermined value. -
Page 4: Package Contents
PACKAGE CONTENTS Saddle Air Conditioner (1) Window Slider Support Bracket (2) • • Remote Control (1) Adjustable Support Knob • • (Long) AAA Battery (2) Adjustable Support Knob • • (Short) Window Slider A Top Foam Sealer (1) • • Short Window Slider B Optional Window Security Bracket... -
Page 5: Specifications
Power consumption is measured when the fan runs at the highest speed setting. • These specifications are for reference only. For actual data, please refer to the rating label on the back of the unit. Model WS3-06E-201 WS3-08E-201 Power Supply (Ph/V/Hz) 1/115/60... -
Page 6: Electrical Safety
ELECTRICAL SAFETY WARNING: grounding prong!! Power supply cord with 3-prong grounding plug and current detection device DISCLAIMER ALL INFORMATION AND THE TECHNICAL SPECIFICATIONS PRESENTED IN THIS USER’S MANUAL ARE THE PRESENATION OF THE MANUFACTURER. SOLEUS N.A. HAS NOT CONDUCTED AN INDEPENDENT TEST TO VERIFY THE INFORMATION AND SPECIFICATIONS PRESENTED HEREWITHIN. -
Page 7: Installation
Before installing the unit, check the dimensions of your window to make sure the air conditioner will fit. This unit is made to fit inside a standard double-hung window. Make sure the window is in good shape. If not, make repairs prior to installing the unit. Model WS3-06E-201 WS3-08E-201 15”... - Page 8 INSTALLATION 1. Attach Mounting Blocks on Window Frame (See Fig.1) Fig.1 1) Remove adhesive from mounting block and place mounting block on window frame. 2) Press down firmly on the mounting block to secure in place. 3) Then, remove adhesive from the other mounting block and place mounting block on window frame.
-
Page 9: Security Bracket
INSTALLATION 4. Install Window Sliders 1) Connect the window sliders together. Short and long window sliders are included to accommodate various window opening sizes. 2) Slide window sliders into both support brackets on either side of the Saddle Air Conditioner. (See Fig.6) *Window sliders can be shortened by cutting with a handsaw so that it fits inside the opening. -
Page 10: Control Panel
CONTROL PANEL Electronic Control Panel & Remote Control Note: This control panel display always shows the room temperature in Fan Mode except when setting the temperature and timer. Auto-On Timer: When the air conditioner is off, it can be set to automatically turn on in 1-24 Normal Operating Sounds hours at the previous set mode and fan settings. -
Page 11: Remote Control
REMOTE CONTROL POWER BUTTON UP ARROW (TEMP/TIMER) MODE BUTTON CHILD LOCK BUTTON MYTEMP MODE BUTTON DOWN ARROW (TEMP/TIMER) SLEEP BUTTON TIMER BUTTON FAN SPEED ENERGY SAVER BUTTON AUTO MODE BUTTON Battery Size: AAA - NOTE: Do not mix old and new batteries or different types of AAA batteries. - Page 12 OPERATION INSTRUCTIONS 1. ON/OFF - Press the POWER button to turn the A/C on or off. When the unit is turned off, the Timer function will be cancelled. The set temperature will be saved. 2. MODE SELECTION - Press the MODE button repeatedly to cycle between the different modes: Cool, Dry (Dehumidifier) and Fan.
- Page 13 USE THE AIR CONDITIONER Freezing Conditions: This is a cooling only air conditioner. It is not designed for freezing outdoor condi- tions. It must not be used in freezing outdoor conditions. Remote Control: To ensure proper operation when using the remote control, aim the remote directly at the signal receiver on the air conditioner.
- Page 14 USE AND CARE CARE AND CLEANING Clean your air conditioner to keep it looking new and to minimize dust build up. Air Filter Cleaning The air filter should be checked at least once every month to see if it needs cleaning. Trapped particles and dust can build up in the filter and may decrease airflow as well as cause the cooling coils to accumulate frost.
-
Page 15: Troubleshooting
TROUBLESHOOTING PROBLEM POSSIBLE CAUSES SOLUTIONS The Air Conditioner will not start The air conditioner is unplugged • Make sure the air conditioner plug is pushed completely into the outlet. • Check the main fuse/circuit The fuse is blown/circuit breaker is tripped breaker box and replace the fuse or reset the breaker. - Page 16 TROUBLESHOOTING PROBLEM POSSIBLE CAUSES SOLUTIONS Hot and humid weather Water is dripping outside • This is normal Water is dripping inside the room The air conditioner is not correctly • For proper water drainage, make tilted towards the outside sure the air conditioner is slightly tilted downward from the front of the unit to the rear.
-
Page 17: Limited Warranty
Five Year Compressor Limited Warranty Soleus N.A. warrants the accompanying Soleus Air Air Conditioner to be free of defects in material and workmanship for the appli- cations specified in its operation instruction for a period of One (1) year for components and FIVE (5) years for the compressor from the date of original retail purchase in the United States.
Need help?
Do you have a question about the WS3-06E-201 and is the answer not in the manual?
Questions and answers
mounting block/window sliders replacement
To replace the mounting block for the Soleus Air WS3-06E-201:
1. Remove the Old Mounting Block
- Carefully detach the existing mounting block from the window frame.
- If adhesive residue remains, clean the area before installing the new block.
2. Attach the New Mounting Block
- Remove the adhesive backing from the new mounting block.
- Place the mounting block on the window frame.
- Press down firmly to secure it in place.
3. Repeat for Additional Mounting Blocks
- If multiple mounting blocks are needed, repeat the process for each one.
For window sliders, no specific instructions are provided in the given context.
This answer is automatically generated
replacement part mounting block/window slider
need to replace block