PRECAUTIONS The LCD panel is a very high technology product with WARNING: 921,600 thin film transistors, giving you fine picture details. Occasionally, a few non-active pixels may appear TO REDUCE THE RISK OF FIRE OR on the TV screen as a fixed point of blue, green or red. ELECTRIC SHOCK, DO NOT EXPOSE THIS Please note that this does not affect the performance of APPARATUS TO RAIN OR MOISTURE.
[Business users] contains lead. Analogue TV operation If you wish to dispose of this product, please visit our web page www.jvc-europe.com to obtain information about the take-back of the product. [Other Countries outside the European Union] Model/Serial Number These symbols are only valid in the European Union.
THINGS TO DO FOR THE FIRST TIME Attaching the stand You need to attach the stand to the unit to display upright. Make sure the front and rear of the stand match the proper direction. Place the unit face down onto Insert the stand all the way to Make sure the stand clicks.
Press to pause recording with pressing at the same Switch to control basic operations of VCR / DVD using this time. (VCR) remote control on our JVC brand. Press to call up the title menu on a DVD. (DVD) Number buttons (subtitle) /...
Page 6
Installing the Batteries 1) Open the battery compartment cover. 2) Insert “R6” penlight batteries into battery compartment in the direction as indicated by the polarity (+/–) markings. Batteries installed with incorrect polarity may damage the remote unit. 3) Close the cover. 4) Push the cover on its top side until it clicks in order to fit the cover completely to the compartment.
[ (standby-on)] to turn on the unit. Dear Customer, By connecting an HDMI cable to your JVC LCD TV, you have to use only a certified HDMI cable to guarantee a sufficient immunity against parasitic frequency radiation.
Page 8
[COMPONENT CONNECTION] [VIDEO CONNECTION] RCA component video connection offers better picture quality. RCA video connection offers standard picture quality. 1) Connect the component video output jack (Y, Pb, Pr) of your 1) Connect the video output jack of your video device and the video device and the COMPONENT video(Y, Pb, Pr) input VIDEO input jack of this unit.
SETUP FOR USE Initial Setting Auto Scan You need to set the followings to use the unit appropriately for the You can scan the digital channels receivable in your area first time you turn on the unit. automatically. 1) Press [ (standby-on)] to turn on the unit.
Page 10
Manual Scan 10) Press [K / L] to select “Sound System”, then press [OK]. 11) Press [K / L] to select the system you want, then press [OK]. You can adjust a digital channel individually. e.g.) “Color System” is “Pal” 1) Press [MENU] to display the menu in digital mode.
Page 11
Teletext C.I. (Common Interface) You can retrieve the teletext information along with analogue TV This unit is equipped with a C.I. (Common Interface) slot. You channels. can enjoy additional services with this function, for example Pay TV. The access restrictions menu will appear on the TV screen when a CI module is installed.
OPERATIONS Watching a TV Programme To cancel the sleep timer Press [ (sleep) / ] repeatedly until “Sleep Off” will appear. To select a channel Sleep Press [TV/DTV] to switch digital or analogue mode. Note: If you disconnect the unit from the AC outlet or if a power failure occurs, the sleep timer will be cancelled.
Page 13
Sound Select TV Screen Information Press [ (sound) / ] repeatedly to cycle through the available You can see the broadcasting information. sound mode. Press [I (information)]. • TV screen information menu will appear. STEREO LEFT The Sounds 09:37 English Hit Music 07:00-09:59 Special Characteristics :...
Page 14
Changing the TV Screen Display Mode For 16:9 video signal You can select your favourite TV screen size in both 4:3 and 16:9 “Full” TV aspect ratios. “Auto” Press [ZOOM / ] repeatedly to switch the TV screen display mode. •...
Page 15
Channel List Channel Edit You can easily find a channel you want. You can select a channel, change the channel order, delete the channel, etc. 1) Press [OK] while watching a programme. 1) Press [MENU] to display the menu. • Channel list will appear. 2) Press [K / L] to select “CHANNEL”, then press [OK].
Page 16
To skip the channel To delete the channel 4) Press [K / L] to select the channel you want to skip, then 4) Press [K / L] to select the channel you want to delete, then press [B]. press [B]. 5) Press [K / L] to select “Skip”, then press [OK].
Page 17
EPG (Electronic Programme Guide) To change the channel order automatically You can easily find a channel or see the detailed channel 4) Press [B]. information. EPG (Electronic Programme Guide) gives you scheduled information of the TV programmes. 5) Press [K / L] to select “Sort:LCN” , “Sort:Name Down”, or “Sort:Name Up”, then press [OK].
OTHER SETTINGS Picture Adjustment “Reset Settings” Press [K / L] to select “Reset”, then press [OK] to restore the You can adjust the picture settings according to your personal preference. These settings are automatically stored after exiting the picture settings to the default. picture menu.
Page 19
Sound Adjustment Lock Setting You can adjust the sound settings according to your personal You can lock the channel or set the parental rating to avoid preferences. These settings are automatically stored after exiting watching an inappropriate programme. the sound menu. 1) Press [MENU] to display the menu.
Page 20
PC Settings Time Zone You can adjust the PC screen position, clock and phase. Make sure You can set the time zone according to the resident area. your PC is connected. 1) Press [MENU] to display the menu. 1) Press [MENU] to display the menu. 2) Press [K / L] to select “DETAIL”, then press [OK].
MAINTENANCE Panel Cleaning Cabinet Cleaning • If the LCD panel should require cleaning, wipe it with a cotton • Wipe the front panel and other exterior surfaces of the unit with or soft cloth. Before cleaning the panel, disconnect the power a soft cloth immersed in lukewarm water and wrung dry.
SPECIFICATIONS General Specifications Other Specifications Television system: PAL I TV standard Remote control: Digital encoded infrared light PAL B/G TV standard system PAL D/K TV standard Power requirements: AC 220-240 V~, 50 Hz SECAM L TV standard Power consumption: 68 W SECAM L' TV standard LCD: 19"...
Page 23
When does switchover happen? Keep this important Copeland switches on October 17, 2007 information about how to re-tune your TV during the digital TV switchover The exact date you switch depends on the transmitter you are Keep this leaflet and your served by.
Page 24
For users in the UK : If you have any problems setting up your new TV, please call the Helpline on 0870 330 5000. For users in the Republic of Ireland : If you have any problems setting up your new TV, please call the Helpline on 1890-582500.