Waterco Hydrochlor TS ® I pg 03 Battery Backup Time Switch Programme the chlorinator timer to turn on or off at any time that suits your lifestyle. The Time Switch comes with a a super capacitor incorporated to save your settings in the event of a power failure.
Page 4
Allow 24 hours for glue (solvent) to set before starting the Hydrochlor TS ® the time switch is permanently ON irrespective of tappet positions. This is the recommended setting to work in combination with Waterco’s Aquamaster or ChemfloPlus. AUTO Position: the time switch is operating on timed control as determined by tappet positions.
Waterco Hydrochlor TS ® I pg 07 Note: When the LED lights flash it is an indication of: Figure 2 • Low salt level • Low temperature or • Cell plates wearing If you don’t know what your salt level is or how to test it, consult your local pool care specialist.
Two Years Warranty: Hydrochlor TS ® Chlorinator 2 years* Titanium cell 2 years Power pack 2 years Commercial Installations 1 year A (mm) B (mm) C (mm) D (mm) 423.5 136.5 280.0 188.8 *Please refer to Waterco’s Warranty terms and conditions...
Need help?
Do you have a question about the HYDROCHLOR TS 20 SC and is the answer not in the manual?
Questions and answers