Chapter 1: Overview; Features - ExtremeWireless WiNG AP7662i Installation Manual

1
Overview

Features

LED Indicators
The AP7662 is an IP67 rated outdoor Access Point with 802.11ac dual band 2:2 radios. The AP7662 is
easy to install, lightweight, and is available in an internal (AP7662i) and external (AP7662) antenna
model. Each model includes 802.11 radios, an IoT radio, and a GPS radio. The AP7662 model comes in
two models: AP7662i (internal antenna) and AP7662 (external antenna). In this document, the
functionality, feature, and the procedure applies to both the models when AP7662i/AP7662 is used.
Note
The AP7662i/AP7662 requires a minimum base firmware of WiNG 5.9.1.
Features
The AP7662i/AP7662 model has the following features:
•
Radios: 2 radios (2.4GHz and 5GHz); 1 IoT/BLE/802.15.4 Radio (2.4 GHz)
•
Console Port: RJ45
•
One RJ45, 10/100/1000 Ethernet Port (GE1) with PoE
•
One RJ45, 10/100/1000Mb Ethernet port (GE2)
•
IP67 Connectors on all ports
•
LEDs: 4 (see Figure 1)
•
One Reset button
•
Power: PoE 802.3af or 802.3at
•
GPS Receiver (will be supported via a future firmware release)
•
Antennas:
•
AP7662i - Five internal antennas (four band locked antennas and one BLE antenna)
•
AP7662- Five external antennas (four single band antennas and one BLE antenna)
•
Temperature:
-40 to +70°C without solar radiation
-40 to +60°C with solar radiation
•
Enclosure: Cast Aluminum base and Top
ExtremeWireless WiNG™ AP7662i/AP7662 Access Point Installation Guide 7