Disassembly; Overview - Sony Ericsson W890 Working Instruction, Mechanical

Working Instruction, Mechanical

2 Disassembly

When you are going to replace a part being listed in Replacements, the instruction of that section
usually begins by directing you to this Disassembly section with a specification of the instructions you
have to carry out in order to disassemble the phone as far as needed before returning to
Replacements for the actual replacement.
REPLACEMENTS
Contents
Start
page
REASSEMBLY
DISASSEMBLY
Done

2.1 Overview

The disassembly is done in the following sequence:
1. Battery Cover & Battery
2. Front Cover Assy Complete
3. Rear Cover Assembly
4. Ant Main PIFA
5. Main PWB
6. Camera Flex Module
7. Display 2,02A-SI TFT
8. Key Flex Module and Frame Sub Assembly PWB
1209-0972 Rev 2 6(64)
©
Company Internal Sony Ericsson Mobile Communications AB