Home Heritage GX1624U31503 Assembly Instructions

ROTATING TREE STAND ASSEMBLY INSTRUCTIONS

Congratulations on purchasing your new rotating tree stand from
instructions below on how to quickly and easily set up your new stand.
Fig.A
Power cord to wall outlet
On/Off
Switch
Fig.D
Green
Label
1. Before you start to assemble your tree with rotating tree stand, choose an appropriate location near a
wall outlet.
2. Before using or reusing inspect product carefully. Discard any products that have cut, damaged, or
frayed wire insulation or cords, cracks in the lampholders or enclosures, loose connections, or exposed
copper wire.
3. Slide the four stand legs upward into slots at the base of the stand until secure. (Fig. A)
4. Place assembled rotating tree stand on a level surface.
5. Insert your Christmas tree's metal pole into the rotating tree stand. HINT: Insert your Christmas tree's
bottom section ONLY into the rotating tree stand first and then continue with the remaining section to
minimize heavy lifting. (Fig. B)
6. Plug in your Christmas tree lights into the yellow labeled outlet receiver on the rotating tree stand. (Fig. C)
7. Plug in the green labeled rotating tree stand plug into wall outlet. (Fig. D)
8. Switch on the motor at the tree stand when you want the tree to revolve. To keep the tree stay still switch
off the motor.
9. Turn on the power switch on the rotating tree stand. Your entire tree should now be lit and rotating. (Fig. E)
If some bulbs do not light or flicker, please refer to your Christmas tree's instruction manual.

STORAGE INSTRUCTIONS

1. When storing the tree stand, carefully remove all other products including the Christmas tree, branches,
or bushes, to avoid any undue strain or stress on the product's conductors, connections and wires.
2. When not in use, store neatly in a cool, dry location protected from sunlight.

SPARE PARTS

Each rotating tree stand includes the following:
1 x stand base
4 x stand legs
1 x extra fuse located in the green labeled wall outlet plug
If extra parts are needed, please contact our customer service center.
ETL #: GX1624U31503
Fig.B
Fig.E
Polygroup®!
Carefully follow the
Fig.C
Yellow
Label