To Install Or Replace Batteries - Intex SL503 Owner's Manual

To install or replace batteries:

1. Dry product completely. Unscrew the battery
housing cover (1) from the Spa LED light (see Fig 1).
Be careful not to lose the two o-rings on the battery
housing cover.
2. Insert 3 AAA size batteries following the orientation
shown on the battery holder (2) (see Fig 2).
3. Reinstall the battery holder (2) into the LED light body according to the orientation (see Fig 3).
4. Securely tighten the battery housing cover (1) by hand only (see Fig 4).
5. Screw the Spa LED light onto the Spa
tub upper outlet grid fi tting, hand tighten
only (see Fig 5).
Note: Do not allow water to get inside
the battery compartment, which can
damage the product and void the
warranty.
SAVE THESE INSTRUCTIONS
(309PO) MULTI-COLORED BATTERY OPERATED LED LIGHT FOR INTEX
Fig 3
Page 3
®
BUBBLE SPA ENGLISH 7.25" X 4.875" 04/25/2018
O-rings
Fig 1
Fig 4
Upper Outlet Grid
Fig 5
309
PO
Fig 2