Conversion System - Fisheye FIX NEO Premium 4030 EF II Manual

Conversion system

As for this product, specifications change is possible by replacing the light head or the body. But
each function is limited by the combination. Please confirm compatibility by the following list if you
want to replace the light head or the body of NEO. And please refer to a dealer nearby.
FIX NEO Light Head/Body Compatibility
○ ： Usable △□ ： Refer service to technician ： Not usable
Body EF II
Body DX II (Blue logo)
Body DX II (White logo)
Body DX (Old)
When you converted the light head or the body, please change the program of the NEO by
following procedures.
1. Hold down the power button for approximately 10 seconds.
2. A signal of [SET] flashes on the LCD panel. After several seconds, the tag of light head flashes
as below.
3. Press the adjustment button(plus or minus) to choose the program of replaced light head.
4. Then press the power button, a new function program is confirmed.
FIX NEO specifications
Tag LCD
403
300
250
200
120
80
BLU
NOTE
- When a signal of [SET] has flashed on by wrong operation, press the power button once for reset.
Mono Wide (except 4030)
Lighting EF mode Remote
FIX NEO Lights
Premium 4030
3000 DX II、 3000 DX
2500 DX、 Premium 2200 DX II、 Premium 2200 DX
2000 DX
1200 DX S、 1200 DX
800 DX
1200 DX BLUE
NEO Light Head
SWR／SW
Lighting EF mode Remote
△ ： rewrite program or replace a circuit board □ ： rewrite program
- 28 -
4030
Lighting EF mode Remote