Fault Query; Inodriveshop - Inovance 810 Series User Manual

4.2.6 Fault Query

1: MD810 power supply unit
01 Fault status
02 Changed parameters 03
Quick commissioning 04
Historical fault
Back
No fault
Back
18:39:41
◆ The current fault information list is displayed in Fault State. The historical
NOTE ◆ Press

4.3 InoDriveShop

InoDriveShop is a piece of commissioning software developed for the 810 series power
supply unit. The following figure shows the software icon.
The functions such as real-time monitoring, parameter configuration, oscilloscope,
Profibus-DP bus configuration, and emergency stop are implemented on the PC using
the InoDriveShop commissioning software.
For details of the introduction and operating instructions of the InoDriveShop software,
refer to the user manuals of the drive units.
1: MD810 power supply unit
01 Parameter setting
02 Status monitoring
03 Device operation
04 Authority management
1 8: 0 0: 0 2
Back
Runnable
1 8: 0 0: 0 2
Select
Fault status
Figure 4-12 Fault query
fault information list is displayed in Historical Fault.
in the page with a box
page and select the fault state query of other machines in the station.
Runnable
Select
1: MD810 power supply unit Runnable
01 Fault status
02 Changed parameters
03 Quick commissioning
04 Historical fault
1 8: 0 0: 0 2
Back
Historical Fault
2016-03-24 18:31:11
2016-03-24 18:31:11
2016-03-24 18:31:10
18:39:52 Delete
Back
to enter the equipment list
4 Panel Operations
Select
- 83 -